Reset VSC OFF warning light Toyota Tundra second generation

Reset VSC OFF warning light Toyota Tundra second generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

How to reset VSC OFF warning light Toyota Tundra 2 generation.

The light flashing warns that there is a problem somewhere in the following.

  • Vehicle stability control system.
  • Traction control system.
  • AUTO LSD system.
  • Downhill assist control system.
  • Hill−start assist control system.

The light will come on when the ignition key turned to “ON”, and will go off after a few seconds. It is not a malfunction that the light may stay on for 60 seconds after the ignition key is turned to the “ON” position. Depressing the brake pedal repeatedly may turn on the lights. It is normal if they go out after a few seconds.

If the light flashes on while driving, the above mentioned systems do not work. However, as conventional braking operates when applied, there is no problem to continue your driving. In the following cases, contact your Toyota dealer:

  • The warning light does not come on after the ignition key is turned to “ON”.
  • The warning light remains on after the ignition key is turned to “ON”.
  • The warning light flashes while driving.

All information how to reset VSC OFF warning light is taken from Toyota Tundra second generation owners manual. This indicator can only be reset by a Toyota delear.


That it is the full procedure how to reset VSC OFF warning light Toyota Tundra 2 generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Toyota vehicles.


4 thoughts on “Reset VSC OFF warning light Toyota Tundra second generation”

  1. Kent Christensen


    I’m wondering if I could get the method to reset the VSC light and auto lsd and check engine light on my 2007 Toyota Tundra? They all come on and remain on ever since the truck needed a new mass air flow sensor. The sensor was fixed as well as a new throttle body was replaced trying to determine issues with the truck. Do you know why all 3 lights are lit up simultaneosly? The VSC flashes continuously, the auto lsd and check engine lights are solid. Any help to troubleshoot and reset these lights would be helpful.

    Thank you,

    Kent C.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.