Reset SRS airbag warning light Toyota Matrix 1 generation E130

Reset SRS airbag warning light Toyota Matrix 1 generation E130. From year: 2005, 2006, 2007, 2008.

How to reset SRS airbag warning light Toyota Matrix 1 generation E130.

This indicator comes on when the ignition key is turned to the “ON” position. It goes off after 6 seconds. This means the SRS airbags and seat belt pretensioners are operating properly.

This warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors, curtain shield airbag sensors, driver’s seat position sensor, driver’s seat belt buckle switch, front passenger occupant classification system and indicator light, front passenger’s seat belt buckle switch, seat belt pretensioner assemblies, inflators, interconnecting wiring and power sources.

If any of the following conditions occurs, this indicates a malfunction of the airbags or seat belt pretensioners. Contact your Toyota dealer as soon as possible.

  • The light does not come on when the ignition key is turned to the “ON” position or remains on for more than 6 seconds or flashes.
  • The light comes on or starts flashing while driving.

The SRS warning light will come on and front passenger occupant classification indicator light will indicate “OFF” if there is a malfunction in the front passenger occupant classification system.

All information how to reset SRS airbag warning light is taken from Toyota Matrix 1 generation E130 owners manual.


That it is the full procedure how to reset SRS airbag warning light Toyota Matrix first generation E130. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.  

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Toyota vehicles.

4 thoughts on “Reset SRS airbag warning light Toyota Matrix 1 generation E130”

    1. If there is a malfunction in the SRS, the SRS airbag warning light comes on to inform the driver of a problem.
      When terminals TC and CG of the DLC3 are connected, the DTC is displayed by blinking of the SRS
      warning light.
      The SRS airbag is equipped with a voltage-increase circuit (DC-DC converter) in the center airbag sensor
      assembly in case the source voltage drops.
      When the battery voltage drops, the voltage increase circuit (DC-DC converter) functions to increase the
      voltage of the SRS airbag to normal voltage.
      A malfunction in this circuit is not recorded in the center airbag sensor assembly. The SRS airbag warning light
      automatically goes off when the source voltage returns to normal.

    1. Hello, to reset Airbag Warning light on a Toyota Matrix you will need a special scanner tool.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.