Reset service light indicator Seat Cordoba

Reset service light indicator Seat Cordoba. From year 1993, 1994, 1995, 1996, 1997, 1998, 1999.

How to reset service light indicator Seat Cordoba.

IN00, no service is required, standard display.

OEL, when 7500 miles has been reached before the yearly service is required.

IN01, indicates time for the yearly service inc oil change.

IN02, indicates it is time for the Major service.

 

 

TO RESET THE INDIVIDUAL COUNTERS on a Seat Cordoba.

1. Switch ignition on, with the engine off.
2. Push the trip reset button on the speedo (the trip value will not reset to zero but will reappear when the procedure is finished).
3. Switch off the ignition and then release the trip reset button. In the LCD display you will see the OEL message. Using the minute set button for the clock (lower one) you will reset the OEL message interval counter. Push, hold, release, five horizontal lines will appear in the monitor.
4. Push and release the trip reset button. In the LCD display you will see IN01 repeat step 3 to reset the inspection counter when required.
5. Again press the trip reset and reset the IN02 counter if necessary. If doing an oil change only reset the OEL counter. If doing an inspection service reset both the OEL and IN01 counters. If doing a full service reset all 3, OEL, IN01 and ,IN02.
6. Switch on ignition, don’t start the engine.
7. After the appearance of the IN00 display switch off the ignition.
8. You are done the trip counter should read as it did before you started.

 

PROGRAMMING THE INTERVALS TO REQUIREMENTS

With todays higher spec oils and/or peoples need and desire to service more regular there is a way to alter the counters to your prefered settings (within reason).

1. Switch on ignition, don’t start the engine.
2. Push the trip reset button also press the Minute set button on the clock (lower one).
3. The LCD display OEL 1,S where the S indicates SET.
4. Using the trip reset button you can call up the following counter data in sequence.

OEL 1,S Distance counter for oil change (7500 standard).

OEL 2,S Time counter for oil change (12 months).

IN 01,S Time counter for yearly service interval (12 months).

IN 02,S Distance counter for full service (15000 miles).

Using the minute SET button on the clock (lower one) you can display the current value repeated pressing of the button will select a subsequent lower value and at the lowest level will reset to the highest and start to decrease again (so dont panic). The steps work in miles (500 at a time) and time steps in bi-monthly (1, 2months) i.e.1,2,3,4,5,6.

Once you have set the counter to the value you require turn off the ignition.

Job done.

 

That it is the full procedure how to reset service light indicator Seat Cordoba. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Seat cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Seat vehicles.