Reset service light indicator Peugeot Bipper

Reset service light indicator Peugeot Bipper. From years: 2008, 2009, 2010, 2011, 2012.

I do not know if this is the real procedure how to reset service light indicator Peugeot Bipper. But at most models the warning light is reseting by following these steps.

How to reset service light indicator Peugeot Bipper.

  1. Switch the ignition OFF.
  2. Depress and hold the trip meter (mileage/km reset) button on the dash.
  3. Turn to ON the ignition, do not start the car.
  4. Keep the trip meter button pressed down for 10 seconds.
  5. After 10 seconds the display will read “= O″.
  6. Release the odometer button.
  7. Switch OFF the ignition and then ON to check if it was reset.

Reset service light indicator Peugeot Bipper.

That it is the full procedure how to reset service light indicator Peugeot Bipper. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Peugeot cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Peugeot vehicles.

19 thoughts on “Reset service light indicator Peugeot Bipper”

  1. Luke llewelyn

    How do I reset the oil light on my 13 plate peugeot bipper
    On the screen it’s saying change oil so I’ve changed oil and the light is still on.

  2. Admin this info is now wrong. On the later Bippers 2013 on, the reset can only be done with diagnostic equipment!

    1. Hello Simon, this info we have from user just like you, procedure is valid only for models made ​​between 2008-2012. Please correct us if is wrong.

      With your help we can improve our site, thank you very much for coment.

  3. I have a 10 plate Bipper Tepee, and can confirm there is no switch on the dash, as all the trip computer menus (including trip reset) are accessed through a button on the wiper stalk.

        1. For the Peugeot Bipper, the mileage reset button is on the dashboard, next to the speedometer.

  4. After changing oil and filter this light is still on change engine oil ? Oil degredation counter reset for 1.3 hdi Bipper 2013 above info doesn’t work on this model, please help. Thank you!

    1. Hello Eddie , if yoar dashboard is like in our picture the procedure is correct, please try again you doing something wrong.

  5. Hi, we have a peugeot bipper 61 plate 1244cc I think .
    Our oil light has come on and we have topped up with oil but it’s still flashing. Any ideas on why and how can we reset it.

    1. Hello Jon, when you say oil light do you mean red light indicator or mainenance sign ?

  6. I forgot to reset after sevice, now my car not getting self or start even after reset it several times.

    There is no service spanner symbol now, it appears for a second only when i am making ignition ON. Please suggest.

  7. It does not work on Peugeot Bipper, and no one seems to know how to reset the flashing engine oil light. I have tried almost everything.

  8. i have same problem , red flashing oil light. i have a peugeot bipper 2014 van. my presets are on the right hand wiper stalk a button on the end. i have tried the hold in and wait 10 seconds procedure with no luck..any ideas please?

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.