Reset service light indicator Mercedes E200

Reset service light indicator Mercedes E200. From years: 1997, 1998, 1999, 2000.


How do you reset service light indicator Mercedes E200. From years: 1997, 1998, 1999, 2000.

Diagnostic Reset Tool Required (please refer to TOOLS page) Manual Reset.

  1. Turn key in steering lock to position 2.
  2. Within 4 seconds press 0 button twice. The present status for days or distance displays, within 10 seconds turn the electroninc key in steering lock to position 0. Picture below.
  3. Reset oil service light Mercedes E200 1997-2000.
  4. Press and hold 0 button while turning electronic key in steering loack to position 2 again.
  5. The present status for days or distance displays once more.
  6. Continue to hold 0 button for approximately 10 seconds until a signal sounds and the display shows 10 000 (15000KM) for approximately 10 seconds. Release 0 button, the status is reset.


That it is the full procedure how to reset service light indicator Mercedes E200. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Mercedes-Benz cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Mercedes Benz vehicles.

10 thoughts on “Reset service light indicator Mercedes E200”

  1. Please advice me how can reset airbag light in mercedes benz e200 1999


    1. Hello Ala, to reset airbag light on a Mercedes Benz E200 from 1999 you most have a auto scanners or diesel diagnostic tools that is specially designed to reset airbag light for your Mercedes Benz E200 from year 1999.

  2. I have an E200 Merc 2002 model. The engine lights started to come on and taken to three workshop and they could not identify the reason for the same. The error code on scanning is 1) Secondary Air Injection Malfunction ( P2036-001) and 2 ) Airflow is too low (PO410). Caqn anyone help or advise me what is to be done. I have spent quite a bit of money and time taking it to different workshops without any achievements


    1. Hello George, may be caused by: water may have collected in the AIR pump or the vent solenoid and frozen or corroded the pump or blown AIR pump fuse due to freezing up. The engine light on your Mercedes E200 will stop automatically after the problem was solved. The car has other symptoms ?

      1. Thank you very much for the reply. No other complaints other than the one specified.The car runs very fine and has no issues other than the engine lights ON all the time.

      2. Hi Admin,

        Sorry for the trouble. I have no idea about vehicles but could you explain where these are located ( Air pump, vent solenoid, pump airpump fuse) in an E200K 2002 model. I want to see if I could do it myself as there is no time for me to spend in the workshop. If you have some pictures of the same I would really appreciate.

        1. Hello George, i’m sorry, earlier I forgot to introduce myself, my name is Ovidiu.
          If you do not have knowledge of mechanics do not attempt to repair the vechicle by yourself.
          Can I advise you to keep your car in a garage where temperature is more than 1 celsius degree.

          I have the same problem on my car during this period (winter) the engine light on my car, one day stay lit two days stay off.

  3. I cannot get my central locking working , the central locking lights flash but no lock any ideas thanks.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.