Reset service light indicator Mercedes CLK 320

Reset service light indicator Mercedes CLK 320. From years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004.

How to reset service light indicator Mercedes CLK 320 (208.365). From years: 1997, 1998, 1999.

1. Diagnostic Reset Tool Required (please refer to TOOLS page) Manual Reset Turn key in steering lock to position 2.
2. Within 4 seconds press 0 button twice.
3. The present status for days or distance displays, within 10 seconds turn the electroninc key in steering lock to position 0.
4. Press and hold 0 button while turning electronic key in steering loack to position 2 again.
5. The present status for days or distance displays once more.
6. Continue to hold 0 button for approximately 10 seconds until a signal sounds and the display shows 10 000 (15000KM) for approximately 10 seconds.
7. Release 0 button, the status is reset.

OR thanks to Michael, this is another procedure:

Benz Service Now Reset (1999 CLK320)

1. Close Door
2. Turn key to position 2 and within 5 seconds press odometer reset button twice.
3. Turn key back to position 1. Now, at the same exact time, press and hold the reset button while turning key back to position 2.
4. Continue to hold reset button until beep sounds and new 10,000 mile interval is displayed on odometer.

---

How do you reset service light indicator Mercedes CLK 320 (208.365, 209.365). From years: 2000, 2001, 2002, 2003.

1. Turn on the ignition (standard display of the control system appears).
2. Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator with (Single Wrench) or (Double Wrench) and the service deadline appears in the multifunction display.
3. Press the reset knob to the left in the instrument cluster for about 4 seconds. Picture below.
4. .
5. This message appears in the multifunction display, DO YOU WANT TO RESET SERVICE INTERVAL? TO CONFIRM PRESS BUTTON. To confirm hold down the reset button until you hear a signal. Picture below.
6. 
7. The service indicator now displays the reset interval.

 .

The full procedure how to reset service light indicator Mercedes CLK 320 (208.365, 209.365) is taken owners manual.

---

How can you reset service light indicator Mercedes CLK 320 (209.365). From year: 2004.

1. Turn on the ignition (standard display of the control system appears).
2. Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator with (Single Wrench) or (Double Wrench) and the service deadline appears in the multifunction display.
3. Press the reset knob to the left in the instrument cluster for about 4 seconds. Picture below.
4. .
5. This message appears in the multifunction display, SERVICE INTERVAL TO RESET. PRESS RESET BUTTON FOR 3 SECONDS. Picture below.
6. .
7. To confirm hold down the reset button until you hear a signal.
8. The service indicator now displays the reset interval.

.

All information how to reset service light indicator Mercedes CLK 320 (209.365) is taken owners manual.

Locate and replace cabin air filter on Mercedes-Benz CLK 320.

That it is the full procedure how to reset service light indicator Mercedes CLK 320. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Mercedes-Benz cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Mercedes Benz vehicles.