Reset service light indicator BMW F20. From years: 2011, 2012.
How to reset service light indicator BMW F20.
Firstly with the ignition switched on, set the odometer trip meter back to zero by pushing it once.
Then switch the ignition back off again. I found this step was critical, otherwise I couldn’t get to the Service menu.
Now you are ready to go through the reset service light indicator BMW F20 steps as follows.
- Switch the ignition on. So that the temperature, km/miles and Parking brake lights are displayed (see the picture). And the key is ready to start the engine but dont actually start the car .
- Press the button from the left dashboard for between 5 and 10 seconds until a inspection service light appears on dysplay.
- Release the button briefly and press again straight away which brings up a picture of the lamp oil symbol. Just release the button and press again and the next service item will appear.
- If you want to reset service light indicator BMW F20. Pres the button until show you on display the service light symbol. Then keep holding the button until it is RESET.
That it is the full procedure how to reset service light indicator BMW F20. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for BMW cars. Or any error which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.
This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.