Reset service engine oil maintenance data Toyota Land Cruiser

Reset service engine oil maintenance data Toyota Land Cruiser 200 series. From year: 2008, 2009, 2010, 2011, 2012, 2013, 2014.

How to reset service engine oil maintenance data Toyota Land Cruiser J200 series.

The oil change system should be reset.

Perform the following procedures:

1. Switch the display to the trip meter A when the engine is running.
2. Turn the “ENGINE START STOP” switch OFF.
3. While pressing the trip meter reset button, set the “ENGINE START STOP” switch to IGNITION ON mode (but do not start the engine because otherwise the reset mode will be cancelled). See the trip metet reset button below.
4. 
5. Continue to press and hold the button until the multi-information display indicates that the reset is complete.

All information how to reset service engine oil maintenance data is taken from Toyota Land Cruiser J 200 owners manual.

That it is the full procedure how to reset service engine oil maintenance data Toyota Land Cruiser 200 series. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Toyota vehicles.