Reset oil service light Toyota Tundra second generation

Reset oil service light Toyota Tundra second generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

How to reset oil service light Toyota Tundra 2 generation.

This light acts as a reminder when to replace the engine oil. This light will come on when the ignition key is turned to “ON” and will go off after about a few seconds. When you drive for about 7200 km (4500 miles) after the engine oil replacement, this light illuminates for about 3 seconds and then flashes for about 12 seconds with the ignition key turned to the “ON” position. If you continue driving without replacing the engine oil, and if the distance driven exceeds 8000 km (5000 miles), the light will come on after the ignition key is turned to “ON” position. The light will remain on thereafter. If the light is flashing, we recommend that you replace the engine oil at an early opportunity depending on the driving and road conditions. If the light comes on, replace it as soon as possible.

The system must be reset after the engine oil replacement. Reset the system by the following procedure:

When tje Maint Requd appears on a Toyota Tundra you must follow this steps to reset the warning light.

Reset maint reqd service light Toyota Tacoma second generation

  1. Turn the ignition key to the “ACC” or “LOCK” position with the odometer reading shown.
  2. Turn the ignition key to the “ON” position while holding down the trip meter reset knob. See below pictures.
  3. Reset service light indicator Toyota Tundra
  4. On dash will appear ” – – – – – –  ” who will blink. See below picture.
  5. Reset maintenance required service light indicator Toyota Tundra second generation
  6. Hold down the knob for at least 5 seconds. The odometer indicates “000000” and the light goes off.
  7. If the system fails to reset, the light will continue flashing.

All information how can you reset oil service light is taken from Toyota Tundra second generation owners manual.


That it is the full procedure how to reset oil service light Toyota Tundra second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Toyota vehicles.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.