Reset oil service light Saturn LW2

Reset oil service light Saturn LW2. From year: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

How to reset oil service light Saturn LW2.

The Saturn LW2 Oil Life insp error light calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the oil error insp light so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a Change Engine Oil light being turned on, reset the oil insp light. 

After changing the engine oil, reset the insp oil light by performing the following steps:

  1. Turn the ignition ON/Run, don’t start the vehicle.
  2. Fully depress and release the gas pedal three times within five seconds.
  3. If the Change Engine Oil insp light is flashing, the system is reset.
  4. The insp oil light will flash for up to 30 seconds or until the ignition is switch to off.
  5. If the insp light comes on again and stays on for 30 seconds at the next ignition cycle, it did not reset. You will need to reset the insp light  again.

All info how to reset oil service light is taken for a Saturn LW2 owners manual.

Reset oil service light Saturn L300.

If this light comes on and stays on, it means that service is required for your Saturn LW2.

What Kind of Engine Oil to Use on a Saturn LW2. Look for two things: GM6094M. Your vehicle’s engine requires oil meeting GM Standard GM6094M. You should look for and use only an oil that meets GM Standard GM6094M. SAE 5W-30. As shown in the viscosity chart, SAE 5W-30 is best for your vehicle. However, if it is going to be 0°F (–18°C) or above and SAE 5W-30 is not available, you may use SAE 10W-30. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 20W-50. Oils meeting these requirements should also have the starburst symbol on the container. This symbol indicates that the oil has been certified by the American Petroleum Institute (API). You should look for this information on the oil container, and use only those oils that are identified as meeting GM Standard GM6094M and have the starburst symbol on the front of the oil container.

Use only engine oil identified as meeting GM Standard GM6094M and showing the American Petroleum Institute Certified For Gasoline Engines starburst symbol. Failure to use the recommended oil can result in engine damage not covered by your warranty. If you are in an area of extreme cold, where the temperature falls below −20°F (−29°C), it is recommended that you use either an SAE 5W-30 synthetic oil or an SAE 0W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures.


That it is the full procedure how to reset oil service light Saturn LW2. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Saturn cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all SATURN vehicles.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.