Reset oil service light Saturn L200

Reset oil service light Saturn L200. From year: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

How to reset oil service light Saturn L200.

The Saturn L200 Oil Life maintenance light calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the maintenance light so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a Change Engine Oil light being turned on, reset the maintenance oil light. 

After changing the engine oil, reset the maintenance oil light by performing the following steps:

  1. Switch to ON/Run the ignition, do not start the vehicle.
  2. Fully push and release the gas pedal three times within five seconds.
  3. If the Change Engine Oil warning light is flashing, the system is reset.
  4. The maintenance oil light will flash for up to 30 seconds or until the ignition is switch to off.
  5. If the maintenance light comes on again and stays on for 30 seconds at the next ignition cycle, it did not reset. You will need to reset the system again.

All information how to reset oil service light is taken from Saturn L200 owners manual.

Reset oil service light Saturn L200.

If this light comes on and stays on, it means that service is required for your vehicle.

When to Change Engine Oil (Saturn Oil Life System) on a Saturn L200. Your car has a computer system that lets you know when to change the engine oil and filter. This is based on engine revolutions and engine temperature, and not on mileage. Based on driving conditions, the mileage at which an oil change will be indicated can vary considerably. For the oil life system to work properly, you must reset the maintenance oil light every time the oil is changed. When the coumputer has calculated that oil life has been diminished, it will indicate that an oil change is necessary. A Change Engine Oil light will come on. Change your oil as soon as possible within the next two times you stop for fuel. It is possible that, if you are driving under the best conditions, the oil life maintenance may not indicate that an oil change is necessary for over a year. However, your engine oil and filter must be changed at least once a year and at this time the maintenance oil light must be reset. It is also important to check your oil regularly and keep it at the proper level. If the system is ever reset accidentally, you must change your oil at 3,000 miles (5 000 km) since your last oil change. Remember to reset the oil service light whenever the oil is changed.

 

That it is the full procedure how to reset oil service light Saturn L200. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Saturn cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all SATURN vehicles.

2 thoughts on “Reset oil service light Saturn L200”

  1. Freelance Gypsy

    The gas pedal trick does not work on my 2003 l200. On mine there is a button in the underhood power distribution box labeled oil, key on engine off hold down the button for about 10 seconds return to the dashboard the light should be blinking at this point you can either kill the key and go home or start the car and see that the light does in fact shut off after a few moments.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.