Reset oil service light Saab 9-3 second generation. From year: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013.
How to reset oil service light Saab 9-3 second generation. From year: 2003, 2004, 2005, 2006.
- Turn ignition to on position, don‘t start the vehicle.
- Press the CUSTOMIZE button to go to Profiler.
- Using the INFO dial select System Settings.
- Depress in the INFO dial.
- Using the INFO dial select the Service Info.
- Next select Reset Service Ind.
- Depress in the INFO dial.
- This question will appear “are you sure” and the answer yes or no.
- Select yes and push INFO dial.
- Turn the ignition to off and then start the vehicle to see if maintenance light has been reset.
.
All information how to reset maintenance oil light on a Saab 9-3 second generation after you change the engine oil is taken from Saab 9-3 owners manual.
Engine oil and oil filter should be changed according to the service program. The oil should be drained when the engine is warm. The car must stand on level ground.
- Unscrew the drain plug in the bottom of the sump and leave the oil to drain into a suitable receptacle for at least 10 minutes. Take care, as the oil may be hot.
- Refit the drain plug with a new washer.
- Change the oil filter once the engine oil has drained (see page 221).
- Fill with new oil. Run the engine to normal temperature and check the oil level.
Engine oil and filter changes on a Saab 9-3. Changing the engine oil and filter is required at every service point. Use only a Saab approved long-life oil filter and engine oils meeting the SAE viscosity ratings and API service classifications stated in the “Technical data” section of this Owner’s Manual. The use of extra additives in the oil is not necessary and is not recommended, and
may be harmful to turbochargers. More frequent oil changes are recommended if your vehicle is operated under any of the following conditions:
- Most trips are less than 5–10 miles (8–16 km). This is particularly important when outside temperatures are below freezing.
- Most trips include extensive idling (frequent stop-and-go traffic).
- Most trips are through dusty areas (such as construction zones).
- If the vehicle is used for delivery service, police, taxi or other commercial applications.
If your driving habits match this description, have the engine oil and filter changed inbetween normal services. These conditions
cause the engine oil to break down faster. The Warranties and Service Record Booklet has provisions to record extra oil changes.
How do you reset oil service light Saab 9-3 second generation. From year: 2007, 2008, 2009, 2010, 2011, 2012, 2013.
- Turn the remote control to the ON position, the vehicle must be switched off.
- Using the steering wheel controls,
select Settings - Press & hold the SET button until given audible confirmation.
- Now select Time for Service.
- Depress the SET button.
- When this question Reset Service Ind? appears on display select YES (press CLR button to undo).
- Turn igntion off and then start the vehicle to see if maintenance light has been reset.
The full procedure how to reset maintenance oil indicator on a Saab 9-3 it’s taken from owners manual.
Engine oil and filter changes. Changing the engine oil and filter is required at every service point. Use only a Saab approved long-life oil filter and engine oils meeting the classifications stated in the Warranty and Service Record Booklet. The use of extra additives in the oil is not necessary and is not recommended, and may be harmful to turbochargers. More frequent oil changes are recommended if your vehicle is operated under any of the following conditions:
- Most trips are less than 5–10 miles (8–16 km). This is particularly important when outside temperatures are below freezing.
- Most trips include extensive idling (frequent stop-and-go traffic).
- Most trips are through dusty areas (such as construction zones).
- If the vehicle is used for delivery service, police, taxi or other commercial applications.
If your driving habits match this description, have the engine oil and filter changed inbetween normal services. These conditions cause the engine oil to break down faster. The Warranties and Service Record Booklet has provisions to record extra oil changes.
That it is the full procedure how to reset oil service light Saab 9-3 second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Saab cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.
This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.