Reset oil service light Pontiac G6. From year: 2004, 2005, 2006, 2007, 2008, 2009, 2010.
How to reset oil service light Pontiac G6. From year: 2004 and 2005.
.
- Switch ON the ignition, do not start the car.
- Fully press & release the accelerator pedal slowly 3 times within 5 seconds.
- When the reset is complete, the CHANGE OIL SOON warning light message can be cleared as described under CHANGE OIL SOON maint indicator.
- Switch the ignition to OFF, and then ON again to check if the warning light has been reset.
- If the CHANGE OIL SOON indicator comes back on when you start your vehicle, the engine oil life maint light has not reset. Repeat the procedure.
The full procedure how to reset oil service light Pontiac G6 from year 2004 and 2005 is taken owner’s manual.
How to reset oil service light Pontiac G6. From year: 2006, 2007, 2008, 2009, 2010.
- Switch the ignition to ON/RUN, one position before starting the car.
- With the CHANGE OIL SOON warning light appears on the monitor, press any of the three Driver Information Center DIC buttons to clear the CHANGE OIL SOON message.
- Display OIL LIFE RESET on the Driver Information Center (DIC).
- Press & hold the ENTER button for at least one second.
- An ACKNOWLEDGED display message will appear for few seconds or until the next button is pressed.
- This will tell you the error has been reset.
- Switch the ignition to LOCK/OFF.
- If the CHANGE OIL SOON message comes back on when you start your your Pontiac G6, the engine oil life system has not reset. Repeat the procedure.
.The full procedure how to reset oil service light Pontiac G6 2006, 2007, 2008, 2009, 2010 is taken owner’s manual.
That it is the full procedure how to reset oil service light Pontiac Grand G6. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Pontiac cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.
This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.
I replaced deployed airbag and clock spring on 2005 Pontiac G6. Horn, blinkers, etc. all work but the airbag light is still on. How can I reset it?
Be careful if the airbag light is still on is possible that the new airbag may not work properly. Your vehicle has the passenger sensing system. Your instrument panel has a passenger airbag status indicator. When the ignition key is turned to ON or START, the passenger airbag status indicator will light ON and OFF, or the symbol for on and off, for several seconds as a system check. If you use remote start to start your vehicle, if equipped, you may not see the system check. Then, after several more seconds, the status indicator will light either ON or OFF, or either the on or off symbol to let you know the status of the right front passenger’s frontal airbag. If the word ON or the on symbol is lit on the passenger airbag status indicator, it means that the right front passenger’s frontal airbag is enabled (may inflate).
If the on indicator comes on when you have a rear-facing child restraint installed in the right front passenger’s seat, it means that the passenger sensing system has not turned off the passenger’s frontal airbag. A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. Do not use a rear-facing
child restraint in the right front passenger’s seat if the airbag is turned on.