Reset oil service light Dodge Caliber

Reset oil service light Dodge Caliber. From years: 2007, 2008, 2009, 2010, 2011, 2012.

How do you reset oil service light Dodge Caliber. When Change Oil message will flash on the display.

Change Oil Message Dodge Caliber. Your vehicle is equipped with an engine oil change indicator system. The “Change Oil” message will flash in the instrument cluster odometer for approximately 12 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style.

Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, press and release the Trip Odometer button on the instrument cluster.

To reset the oil change service light indicator system Dodge Caliber (after performing the scheduled maintenance) refer to the following procedure.

  1. Turn the ignition switch to the ON position. Do not start the engine.
  2. Fully depress the accelerator pedal slowly three times within 10 seconds.
  3. Turn the ignition switch to the OFF/LOCK position.

NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary repeat this procedure.

All information is taken from the Dodge Caliber owners manual.

Reset oil service light Dodge Caliber.

If you want to locate and replace you cabin air filter on Dodge Caliber click here!

That it is the full procedure how to reset oil service light Dodge Caliber. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Dodge cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Dodge vehicles.

9 thoughts on “Reset oil service light Dodge Caliber”

    1. Hello Jo, please answer the following questions.
      What car do you have and when was made?
      Which is the warning light that you want to reset ?

  1. I have a dodge calibre Manuel 1.8 /2009 model I want to reset the oil change required message light.

  2. I have a 2010 Dodge Caliber.
    I have followed “change oil’ reset procedure several times and it still wont reset!

    What do I do next?

    1. The procedure for the service light indicator reset is taken from the car’s manual and tested by us. It should work perfectly.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.