Reset oil service light Chrysler 200

Reset oil service light Chrysler 200.

How do you reset oil service light Chrysler 200.

To reset the change oil light after an oil change on a Chrysler 200, follow this steps:

  1. Turn the ignition to run, one position before starting engine.
  2. Fully depress the accelerator pedal slowly three times within 10 seconds.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.


That it is the full procedure how to reset oil service light Chrysler 200. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Chrysler cars. Or any error which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Chrysler vehicles.

28 thoughts on “Reset oil service light Chrysler 200”

  1. Hello how are you?
    I have a Chrysler 300 2012 and the engine light keeps turning on when filling it with bat gass, how can I fix it ?

    1. Hello Zhiar, i am very well, thanks.
      The engine indicator keeps turning on because that petrol you use is of poor quality, could have water in.

  2. I bought a 2013 Chrysler 200. 2.4 engine and my husband changed the oil before it’s due. My question is how to reset the oil reminder back to 100%, because it never came on?

      1. How do you reset it before it’s due? That’s my same question too. I’m a salesman and I can be gone for two months at a time and I change mine just before I leave. I don’t have time to find a place to change my oil and some rural areas you can’t find a place.

    1. My niece has a Chrysler 200 too and a shop had to remove the wheel and inner plastic fender to replace her battery. All those places that advertise they do free battery replacement will not do it!

    2. Glen Barbour

      It is under the drivers side wheel well. (1). Remove tire (2) remove (Black) push-ins (3) Loosen screws holding battery in place. (4). Pull out and change battery (5). Do everything in reverse to secure. I hope this helps. Check Youtube to get a visual.

  3. After first oil change held the ok button for a few seconds and it reset, 2nd change just done and I can’t get it to reset this time 2016 200 lx

    1. Hello! Our team has taken in consideration your request for the future posts. Thank you!

  4. teresa finn

    i have 2015 Chrysler 200 will this work on my car I am having this issue just had oil changed

  5. Raymond Holden

    I’ve done this several times on my mom 2015 Chrysler 200c with an EVIC. All it says when I start the car at the end of the procedure is “side collision avoidance disabled”. Is there a way to tell if it has been reset or what the current oil life is? I can’t find it in the book and it is nowhere in the EVIC menus.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.