Reset malfunction indicator warning light Toyota Yaris

Reset malfunction indicator warning light Toyota Yaris second generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011.

How to reset malfunction indicator warning light Toyota Yaris 2 generation.

This lamp comes on when the ignition key is turned to the “ON” position and goes off after the engine starts. This means that the warning light system is operating properly. If the lamp remains on, or the lamp comes on while driving, first check the followings.

  • Empty fuel tank. If the fuel tank is empty, refuel immediately.
  • Loose fuel tank cap. If the fuel tank cap is loose, securely tighten it.

These cases are temporary malfunctions. The malfunction indicator lamp will go off after taking several driving trips.

If the lamp does not go off even after several trips, contact your Toyota dealer as soon as possible.

If the fuel tank is not empty or the fuel tank cap is not loose.

  • There is a problem somewhere in the engine, emission control system, electronic throttle control system, automatic transmission electrical system or warning light system itself.

Contact your Toyota dealer as soon as possible to service the vehicle. If engine speed does not increase when the accelerator pedal is depressed, there may be a problem somewhere in the electronic throttle control system.

At this time, vibration may occur. However, if you depress the accelerator pedal more firmly and slowly, you can drive your vehicle at low speeds. Have your vehicle checked by your Toyota dealer as soon as possible. Even if the abnormality of the electronic throttle control system is corrected during low speed driving, the system may not be recovered until the engine is stopped and the engine off.

Be especially careful to prevent erroneous pedal operation.

Emissions Inspection and Maintenance (I/M) programs.

Your vehicle may not pass a state emission inspection if the malfunction indicator lamp remains on. Contact your Toyota dealer to check your vehicle’s emission control system and OBD (On−Board Diagnostics) system before taking your vehicle for the inspection.

All infromation how can you reset malfunction indicator warning light is taken from Toyota Yaris owners manual.

 

That it is the full procedure how to reset malfunction indicator warning light Toyota Yaris Toyota Yaris second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Toyota vehicles.

2 thoughts on “Reset malfunction indicator warning light Toyota Yaris

  • 06/06/2018 at 19:07
    Permalink

    My Toyota Yaris 2010 not starting. Even Remote Keys are not working to lock or unlock the doors. I have checked and changed remote keys battery, still same issue. I have checked the car battery and try to boost up the battery, still no luck. What will be issue? Please comment or share your experience.

    Reply
    • 13/02/2019 at 15:46
      Permalink

      If the car’s battery is OK and the car still doesn’t start, the problem might be with the chip inside the key.

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.