How to change the side marker light on Toyota Camry 1995

Do it yourself, change the side marker light assembly on your Toyota Camry, the model made in the year 1995. You will need a flat blade screwdriver, a Phillips screwdriver and probably a rag, or a soft cloth to protect the paint on the car. The replacement is very simple and it will not take you more than 10 minutes.

     First, open the hood of your car and go above the headlight and the parking light you need to replace. You will have to remove a Phillips screw, similar to the one seen in the picture below.

     You should be able to remove that screw without much effort. After you do it, you can insert a flat blade screwdriver between the parking light and the fender and pry out. Move the assembly at the same time, to release it from the body of the car and after you do it, disconnect the harness behind it, as seen next.

     At this point you can also service the light bulb, if that’s what you need. You can do it by twisting its socket counterclockwise. If not, just reconnect the new parking light to the main harness, insert it into the body of the car (pay attention to its guiding pins) and secure it with the Phillips screw on top. These are the steps you need to follow, if you wish to quickly and easily replace the parking light assembly on your Toyota Camry, the model produced in the year 1995.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.