How to change the fog light bulb on Toyota Sequoia 2001-2004

Do it yourself, change the fog light bulb on your Toyota Sequoia, if it’s the model made in the years 2001, 2002, 2003 and 2004. You will require a 10 mm socket wrench or a Phillips screwdriver to service this bulb. The replacement can be done quite easily, in less than five minutes.      First,…

DIY, change the tail light on Toyota Sequoia 2001-2004

Do it yourself, change the tail light assembly on your Toyota Sequoia, the model produced between the years 2001 and 2004. You will need a Phillips screwdriver and a 10 mm socket wrench. The replacement procedure is pretty easy but it will probably take you more than half an hour.      You can start…

How to change the blower motor on Toyota Sequoia 2001-2007

Do it yourself, change the blower motor on your Toyota Sequoia, the model made between 2001 and 2007. If your blower motor is making loud noises, or it’s broken, you might consider replacing it. The repair is very simple and it will require only a T25 torx driver and a new motor. You can do…

DIY, change the headlight on Toyota Sequoia 2001-2004

Do it yourself, change the headlight assembly on your Toyota Sequoia, made between the years 2001 and 2004. You will require a Phillips screwdriver and a 10 mm wrench, or a socket with a ratchet, of the same size. The replacement is quite easy, but it might take you more than half an hour, depending on the…

How to change the parking light assembly on Toyota Sequoia 2001-2004

DIY, change the parking light assembly on your Toyota Sequoia, the model manufactured between the years 2001 and 2004. This is a replacement that can be done in less than 10 minutes, if you follow the simple steps below. You will only require a Phillips screwdriver and a new parking light.      First of all,…

DIY, change the blower motor on Toyota 4Runner 1996-2002

Do it yourself, change the blower motor on your Toyota 4Runner. The repair process we show you next is similar for models made between the years 1996 and 2002. You will require a Phillips screwdriver and an 8 mm socket wrench, with a ratchet and an extension. The whole process is simple and it will…

How to change a broken door handle on Toyota 4Runner 1996-2002

DIY, change the broken door handle on your Toyota 4Runner, the model made in the years 1996, 1997, 1998, 1999, 2000, 2001 and 2002. This is a simple repair that can be done in less than 5 minutes, using a small flat blade screwdriver and a Phillips screwdriver.      The replacement starts after you…

DIY, change the tail light assembly on Toyota Tacoma 2001-2004

Do it yourself, change the tail light assembly on your Toyota Tacoma, the model produced between the years 2001 and 2004. You will only require a Phillips screwdriver and no more that 15 minutes of your time.      You can start the repair by removing the four screws marked with blue circles in the picture…

How to change the side marker light on Toyota Tacoma 2001-2004

DIY, change the side marker light assembly on your Toyota Tacoma. The repair is similar on Tacoma models made between the years 2001 and 2004. You may wanna do it to replace the bulbs, or to install a new side marker, because the old one is broken or faded. In order to make this simple replacement,…

DIY, change the bumper signal lights on Toyota Tacoma 2001-2004

Do it yourself, change the front bumper mounted signal light on your Toyota Tacoma, produced between the years 2001 and 2004. It’s a pretty easy replacement for which you will require a flat blade screwdriver and a couple of minutes.      The repair process starts in front of the car, obviously. Using the tip of…