DIY, remove the front door panel on Dodge Stratus 2001-2006

Do it yourself, remove the front door panel on your Dodge Stratus, produced between the years 2001 and 2006. The procedure requires a flat blade screwdriver, a Phillips screwdriver and a putty knife. Removing and reinstalling the door panel will probably take you more than half an hour.      Open the driver’s door and start…

How to change the tail light on Dodge Stratus 2001-2006

Do it yourself, change the tail light assembly on your Dodge Stratus, the model made between the years 2001 and 2006. There are no tools required to make this replacement. The repair can be done in less than 15 minutes, in the back of your garage.      First, you will have to open the trunk…

How to change the headlight assembly on Dodge Stratus 2001-2006

DIY, change the headlight on your Dodge Stratus, the model made between 2001 and 2006. This replacement can be done in about half an hour, using a 7 mm wrench or a socket with a ratchet and a flat blade screwdriver.      First, open the hood of the car and, using the tip of a flat…

How to change the tail light assembly on Dodge Ram 1994-2001

Do it yourself, change the tail light assembly on your Dodge Ram, the model made between the years 1994 and 2001. You will require a T25 torx driver and probably less than 15 minutes, because this repair is quite simple.      You can start the replacement by opening the tail gate of your car….

How to remove the door panel on Dodge Ram 1994-2001

DIY, remove the front door panel on your Dodge Ram 1500, the model produced between the years 1994 and 2001. You will need a 10 mm socket with a ratchet and extension, a flat blade screwdriver, a Phillips screwdriver and a putty knife. The removal process will take you less than 20 minutes.      After…

How to change the ignition coil on Dodge Intrepid 1993-1997

Do it yourself, remove and replace the ignition coil on your Dodge Intrepid, the model equipped with the 3.5L V6 engine, produced between the years 1993 and 1997. You will need a flat blade screwdriver, a 10 mm socket with a ratchet and probably more than a half an hour.      First, after you open and…

How to change a fog light assembly on Dodge Intrepid 1993-1997

DIY, change a fog light assembly on your Dodge Intrepid. The replacement procedures shown next should be similar on models of this car produced between the years 1993 and 1997. You will only require a Phillips screwdriver and about 5 minutes of your time.      This repair is very, very simple. You just have…

How to remove the rear door panel on Dodge Intrepid 1993-1997

Do it yourself, remove the rear door panel on your Dodge Intrepid. The replacement is similar for most of the models made for this car, between the years 1993 and 1997. You will only require a Phillips screwdriver and about 15 minutes.      You can start by disconnecting the negative cable from your battery….

DIY, change the master window switch on Dodge Intrepid 1993-1997

Do it yourself, change the master window switch on your Dodge Intrepid, the model produced between the years 1993 and 1997. You will require a flat blade screwdriver and a Phillips screwdriver to make this replacement. The whole process is very simple and it will take you less than 10 minutes.      First of…

DIY, change the tail light assembly on Dodge Intrepid 1994-1997

Do it yourself, remove and replace the the tail light assembly on your Dodge Intrepid, the car produced between the years 1994 and 1997. The only tool required for this replacement is a flat blade screwdriver. The whole process will take you less than 15 minutes.      First, you will have to open the…