How to change the ignition coil on Dodge Intrepid 1993-1997

Do it yourself, remove and replace the ignition coil on your Dodge Intrepid, the model equipped with the 3.5L V6 engine, produced between the years 1993 and 1997. You will need a flat blade screwdriver, a 10 mm socket with a ratchet and probably more than a half an hour.      First, after you open and…

How to change a fog light assembly on Dodge Intrepid 1993-1997

DIY, change a fog light assembly on your Dodge Intrepid. The replacement procedures shown next should be similar on models of this car produced between the years 1993 and 1997. You will only require a Phillips screwdriver and about 5 minutes of your time.      This repair is very, very simple. You just have…

How to remove the rear door panel on Dodge Intrepid 1993-1997

Do it yourself, remove the rear door panel on your Dodge Intrepid. The replacement is similar for most of the models made for this car, between the years 1993 and 1997. You will only require a Phillips screwdriver and about 15 minutes.      You can start by disconnecting the negative cable from your battery….

DIY, change the master window switch on Dodge Intrepid 1993-1997

Do it yourself, change the master window switch on your Dodge Intrepid, the model produced between the years 1993 and 1997. You will require a flat blade screwdriver and a Phillips screwdriver to make this replacement. The whole process is very simple and it will take you less than 10 minutes.      First of…

DIY, change the parking light assembly on Dodge Intrepid 1993-1997

Do it yourself, change the parking light assembly on your Dodge Intrepid, the model manufactured between the years 1993 and 1997. This is a very simple replacement that can be done in less than 5 minutes and there are no tools required to do it.      First of all, you must open the hood of…

How to change the headlight on Dodge Intrepid 1993-1997

DIY, change the headlight assembly on your Dodge Intrepid, the model made between the years 1993 and 1997. This particular repair will require a T15 torx screwdriver and possibly a pair of pliers and some penetrating oil. Replacing the headlights is quite simply and you should be able to do it in less than half…