How to change the tail light assembly on Chevy Malibu 2004-2008

Do it yourself, change the tail light assembly on your Chevy Malibu. The replacement process we show you below is similar for Malibu sedan models produced between the years 2004 and 2008. To make this replacement you will need a Phillips screwdriver and about 20 minutes of your time.      You can start by removing…

DIY, change the exterior door handle on Chevy Malibu 2004-2008

Do it yourself, change the exterior door handle on your Chevy Malibu, the model manufactured between the years 2004 and 2008. You may wanna do this replacement if your door handle brakes or you just wanna upgrade to chrome door handles. The procedure is simple and it requires a T25 torx driver and about 10…

How to remove the front door panel on Chevy HHR 2006-2010

Do it yourself, remove the front door panel of your Chevy HHR, the model produced in the years 2006, 2007, 2008, 2009 and 2010. We show you below a step by step tutorial for the door panel on the passenger’s, front side. The only tools you’ll need are a flat blade screwdriver, a T30 torx…

How to change the blower motor on Chevy Malibu 1997-2003

DIY, change the heater blower motor on your Chevy Malibu, produced between the years 1997 and 2003. You will need 7 mm and 7/32 sockets to make the replacement. The whole procedure might take you more than half an hour.      The blower motor on this car is located beneath the glove box, on…

How to change the window switch on Chevy Malibu 1997-2003

DIY, change the master window switch on your Chevy Malibu, the model produced in 1997, 1998, 1999, 2000, 2001, 2002 and 2003. This is a very simple repair that will require a flat blade screwdriver and about 10 minutes of your time.     First of all, you have to open the front door, on…

DIY, change the side marker light on Chevy Malibu 1997-2003

Do it yourself, change the side marker light assembly on your Chevrolet Malibu, the model made between 1997 and 2003. For this replacement you will need a T15 torx driver, a new side marker light assembly and probably less than 10 minutes, because the process is very simple.      First of all, you need…

DIY, change a fog light assembly on Chevy Camaro IROC-Z

Do it yourself, change a fog light assembly on your Chevy Camaro IROC-Z. The replacement is very simple and can be done in less than 15 minutes, using a 10 mm wrench, or a socket of the same size.      You will have to get beneath the car in order to access the fog…

DIY, remove the rear door panel on Chevrolet Trailblazer 2002-2009

DIY, remove the rear door panel on the driver’s side of your Chevrolet Trailblazer, the model produced between the years 2002 and 2009. In order to do it, you will require a small flat blade screwdriver and a 7 mm socket wrench. You should be able to remove the door panel in less than 15 minutes,…

How to change the rear shock absorbers on Chevy Trailblazer

Do it yourself, change the rear shock absorbers on your Chevrolet Trailblazer. Servicing this parts is actually a quite simple task, that can be done in the back of your garage in less than half and hour. You will need an 18 mm socket wrench, with a ratchet and probably a jack stand or elevator…

DIY, change the back door support struts on Chevy Trailblazer 2002-2009

Do it yourself, change the back door support struts on your Chevy Trailblazer, the model produced between the years 2002 and 2009. If you have issues with your back hatch sagging down, you might consider replacing the gas struts that support it. You can do it in about 5 minutes, using only a small flat…