Reset VSC warning light Toyota Prius second generation XW20. From year: 2003, 2004, 2005, 2006, 2007, 2008.
How to reset VSC warning light Toyota Prius second generation XW20.
This light warns that there is a problem somewhere in the vehicle stability control system. The light will come on when the “IG−ON” mode is enabled and will go off after the “READY” light comes on. If the light comes on while driving, the system does not work. However, as conventional braking operates when applied, there is no problem to continue your driving.
In the following cases, contact your Toyota dealer:
- The warning light does not come on after the “IG−ON” mode is enabled.
- The warning light remains on after the “READY” light comes on.
- The warning light comes on while you are driving.
If the “VSC” warning light remains on together with the red brake system warning light, immediately stop your vehicle at a safe place and contact your Toyota dealer. In this case, not only the vehicle stability control system will fail but also the vehicle will become extremely unstable during braking.
All information how can you reset VSC warning light is taken fron toyota Prius 2 owners manual.
That it is the full procedure how to reset VSC warning light Toyota Prius second generation XW20. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.
This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.