Reset VSC warning light Toyota Matrix first generation E130. From year: 2005, 2006, 2007, 2008.
How to reset VSC warning light Toyota Matrix first generation E130.
The light warns that there is a problem somewhere in the vehicle stability control system or traction control system.
The light will come on when the ignition key is turned to “ON”, and will go off after about a few seconds. If the light comes on while driving, the system does not work. However, as conventional braking operates when applied, there is no problem to continue your driving.
In the following cases, contact your Toyota dealer:
- The warning light does not come on after the ignition key is turned to “ON”.
- The warning light remains on after the ignition key is turned to “ON”.
- The warning light comes on while driving.
The slip indicator light/traction control system off indicator light will come on when the “VSC” warning light comes on even if the “TRAC OFF” switch is not pushed.
That it is the full procedure how to reset VSC warning light Toyota Matrix first generation E130. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.
This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.