Reset VSC trac warning light Toyota FJ Cruiser

Reset VSC trac warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

How to reset VSC trac warning light Toyota FJ Cruiser.

The light warns that there is a problem somewhere in the following.

  • Vehicle stability control system.
  • Traction control system.
  • Active traction control system four−wheel drive models with rear differential lock.
  • AUTO LSD system two−wheel drive models.

Four-wheel drive models, and vehicles with rear differential lock-the “VSC OFF” indicator light will come on with the “VSC TRAC” warning light if there is a problem somewhere in the vehicle stability control system.

The light will come on when the ignition key turned to “ON”, and will go off after a few seconds.

The slip indicator light will come on with the “VSC TRAC” warning light if there is a problem somewhere in the following.

  • Traction control system.
  • Active traction control system four−wheel drive models with rear differential lock.
  • AUTO LSD system two−wheel drive models.

It is not a malfunction that the warning light may stay on for 60 seconds after the ignition key is turned to the “ON” position. Depressing the brake pedal repeatedly may turn on the lights. It is normal if they go out after a few seconds.

If the light comes on while driving, the above mentioned systems do not work. However, as conventional braking operates when applied, there is no problem to continue your driving.

In the following cases, contact your Toyota dealer:

  • The warning light does not come on after the ignition key is turned to “ON”.
  • The warning light remains on after the ignition key is turned to “ON”.
  • The warning light comes on while driving.

When the brake fluid level is too low, the above mentioned systems will not operate and the warning light comes on.

All information how can you reset VSC trac warning light is taken from Toyota FJ Cruiser owners manual.

 

That it is the full procedure how to reset VSC trac warning ligh Toyota FJ Cruiser. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Toyota vehicles.

Leave a Reply

Your email address will not be published. Required fields are marked *