Reset VSC off warning light Toyota Tacoma second generation. From year: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.
How to reset VSC off warning light Toyota Tacoma second generation.
The light flashing warns that there is a problem somewhere in the following.
- Vehicle stability control system.
- Traction control system.
- “AUTO LSD” system.
- Downhill assist control system.
- Hill−start assist control system.
The light will come on when the ignition key turned to “ON”, and will go off after a few seconds. It is not a malfunction that the light may stay on for 60 seconds after the ignition key is turned to the “ON” position. Depressing the brake pedal repeatedly may turn on the lights. It is normal if they go out after a few seconds.
If the light flashes on while driving, the above mentioned systems do not work. However, as conventional braking operates when applied, there is no problem to continue your driving.
In the following cases, contact your Toyota dealer:
- The warning light does not come on after the ignition key is turned to “ON”.
- The warning light remains on after the ignition key is turned to “ON”.
- The warning light flashes while driving.
All information how to reset VSC off warning light is taken Toyota Tacoma second generation owners manual.
That it is the full procedure how to reset VSC off warning light Toyota Tacoma 2 generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.
This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.