Reset the value of average fuel consumption Fiat Sedici

How to reset the value of average fuel consumption Fiat Sedici.

This display can be changed to show instantaneous fuel consumption or average fuel consumption by changing the display. Also, the display of fuel consumption can be turned off if you desire.

When the ignition switch is turned to the “ACC” or “ON” position:

If you selected instantaneous fuel consumption the last time you drove the vehicle, the display indicates “–.-”. Unless the vehicle is moving, the display will indicate “–.-”.

If you selected average fuel consumption the last time you drove the vehicle, the display shows the last value of average fuel consumption. Unless you reset the value of average fuel consumption, the display will show the value of average fuel consumption which includes average fuel consumption during previous driving. For details of how to reset the display, refer to the explanation in this section.

Reset the value of average fuel consumption Fiat Sedici

Every time you push the “DISP” knob (c), the display will be changed among the following three displays.

e. Instantaneous fuel consumption

f. Average fuel consumption

g. No display

To reset the value of average fuel consumption, hold in the “DISP” knob (c) for more than 2 seconds. The display will indicate “–.-” and then will show the average fuel consumption again after driving for a short time.

You can also change the unit display of fuel consumption. You should operate the display before the vehicle moves. To change the display, follow the instructions below.

How to reset the value of average fuel consumption Fiat Sedici

 

  • Turn the ignition switch to the “ACC” or “ON” position while holding in the “DISP” knob (c). The unit display of fuel consumption will blink the current unit.
  • Push the “DISP” knob (c) quickly to change the display as shown in the above illustrations.
  • Push the “DISP” knob (c) for more than 2 seconds, and the unit display will stop blinking and the display will stay on. If you don’t operate the “DISP” knob (c) within about 8 seconds, the unit display will automatically stop blinking and the display will stay on.

Note:

  • The value of fuel consumption shown in the display is affected by such as following conditions;
  • road condition
  • surrounding traffic condition
  • driving condition

The information display will be changed to the state of initialization when you reconnect the negative (–) terminal to a battery.

How can you reset the value of average fuel consumption Fiat Sedici

 

This display shows instantaneous fuel consumption when the vehicle is moving. However, the display of instantaneous fuel consumption can be turned off if you desire.

Unless the vehicle is moving, the display will indicate “–.-”

You can change the unit indication between “l/ 100km” or “MPG” and you can also turn the display off. To change the indication, follow the instructions below.

  • Hold in the “DISP” knob (c) for more than 2 seconds. The unit display of the instantaneous fuel consumption will blink. When the display of instantaneous fuel consumption is turned off, the display “– -” will appear.
  • Push the “DISP” knob (c) quickly to change the indication as shown in the above illustration.
  • Push the “DISP” knob (c) for more than 2 seconds, and the unit indication will stop blinking or the display “– -” will go out and the display will be turned off. If you don’t operate the “DISP” knob (c) within about 8 seconds after the unit indication starts blinking, the unit display will automatically stop blinking or the display “– -” will go out and the display will be turned off.

The value of fuel consumption shown in the display is affected by such as following conditions;

  • road condition
  • surrounding traffic condition
  • driving condition

The information display will be changed to the state of initialization when you reconnect the negative (–) terminal to a battery.

Reset value of average fuel consumption Fiat Sedici

Leave a Reply

Your email address will not be published. Required fields are marked *