Reset service light indicator Saab 9-3 second generation

Reset service light indicator Saab 9-3 second generation. From year: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How to reset service light indicator Saab 9-3 second generation. From year: 2003, 2004, 2005, 2006.

Under this heading you can make system settings, such as change the display language, units and service information.

  1. Switch ignition to on position, do not start the engine.
  2. Press the CUSTOMIZE button to go to Profiler.
  3. Select System Settings using the INFO dial.
  4. Press in the INFO dial.
  5. Select the service info heading using the INFO dial.
  6. Select Reset Service Ind.
  7. Press in the INFO dial.
  8. Next question will appear, Are You Sure and the answer yes or no.
  9. Select yes and press INFO dial.
  10. Switch the ignition to off and then start the engine to see if service light has been reset.

Reset service light indicator Saab 9-3 second generation display.

All information how to reset service light indicator Saab 9-3 second generation is taken owner’s manual.

Reset service light indicator Saab 9-3 second generation owners manual.

Language. Select the desired language. The number of languages can vary between markets.

Unit. Select the desired group of units

Speed Scale Illum. Select the proportion of the speedometer to be illuminated in Night Panel mode.

Service Info Saab 9-3 second generation.

Service Data: the approximate condition of the oil is shown here. 100% is equivalent to new engine oil.

Service Type: the type of service that is required is shown here.

Reset Service Ind.: The service indicator can be reset here. This is normally done at the dealer in connection with a service.

Maintenance schedule Saab 9-3 second generation. The Maintenance Schedule prescribes a service program to the purchaser/operator of a Saab that is reasonable and necessary to ensure the proper emission control systems function, safety and reliability of the Saab automobile in normal use. Additional maintenance is recommended for specific components when the car is operated under certain severe conditions. Proper maintenance is always a good practice!Authorized Saab dealers are equipped and
trained to meet your Saab’s service needs. They regularly receive up-to-date Saab service manuals and parts and technical service bulletins from Saab and are able, through their franchise agreement, to attend Saab service schools, obtain Saab special tools and technical assistance and purchase original equipment service and replacement parts. Today’s complex automobiles should only
be entrusted to the most knowledgeable service professionals. A Saab dealer is your best choice.

SERVICE INTERVALS Saab 9-3 second generation. The maintenance schedule begins with an Inspection Service at 30 days. A time for service message will illuminate on the Saab Instrument Display (SID) when the car is due for regular maintenance. There are twi different messages that will appear:

TIME FOR INTERMEDIATE SERVICE Saab 9-3 second generation. Indicates that an oil/filter change is required along with several inspections. This message is set by the engine management system which calculates service intervals based on several factors including driving habits, ambient temperature, number of cold starts, mileage driven and elapsed time since the last service. Based on this algorithm, this message may appear at mileage as low a 8,000 or as high as 15,000 miles. If mileage accumulation does not occur, the message will be set, and maintenance required at a maximum of 2 years.

TIME FOR MAJOR SERVICE Saab 9-3 second generation. Will be set when additional maintenance is necessary, such as air filter or spark plug replacement. This message will appear at 30,000 mile intervals. When either message is displayed, contact your Saab Dealer for a service appointment. Failure to perform scheduled maintenance in a timely manner may result in serious damage to key components or systems.

 

How to reset service light indicator Saab 9-3 second generation. From year: 2007, 2008, 2009, 2010, 2011, 2012.

Reset the service indication in accordance with the following:

  1. Turn the remote control to the ON position, the engine must be switched off.
  2. Select Settings using the steering wheel controls, Saab steering wheel controls.
  3. Push & hold the SET button until given audible confirmation.
  4. Select Time for Service.
  5. Press the SET button.
  6. To the question Reset Service Ind? select YES (Press CLR button to undo).
  7. Switch igntion off and then start the engine to see if warning light has been reset.
The full procedure how to reset service light indicator Saab 9-3 second generation is taken owner’s manual.

Next Service: xx% Saab 9-3 second generation. Displayed percentage is approximately equivalent to the condition of the engine oil. 100% is equivalent to new engine oil. The type of service that is required is also shown here.

Time for Service Saab 9-3 second generation.

When it is time for service the required service type is displayed.

INTERMEDIATE

MAIN

MAIN & INTERMED

A service indication must only be reset after the service has been performed.

Maintenance schedule Saab 9-3 second generation. The Maintenance Schedule prescribes a service program to the purchaser/operator of a Saab that is reasonable and necessary to ensure the proper emission control systems function, safety and reliability of the Saab automobile in normal use. Additional maintenance is recommended for specific components when the car is operated under certain severe conditions. Proper maintenance is always a good practice! Authorized Saab dealers are equipped and
trained to meet your Saab’s service needs. They regularly receive up-to-date Saab service manuals and parts and technical service bulletins from Saab and are able, through their franchise agreement, to attend Saab service schools, obtain Saab special tools and technical assistance and purchase original equipment service and replacement parts. Today’s complex automobiles should only
be entrusted to the most knowledgeable service professionals. A Saab dealer is your best choice.

SERVICE INTERVALS Saab 9-3 second generation. A time for service message will illuminate on the Saab Instrument Display (SID) when the car is due for regular maintenance.

Reset time for service light Saab 9-3 second generation

There are three different messages that will appear:

TIME FOR INTERMEDIATE SERVICE Saab 9-3 second generation. Indicates that an oil/filter change is required along with several inspections. This message is set by the engine management system which calculates service intervals based on several factors including driving habits, ambient temperature, number of cold starts, mileage driven and elapsed time since the last service. If mileage accumulation does not occur, the message will be set, and maintenance required at a maximum of 1 year.

TIME FOR MAIN AND INTERMEDIATE SERVICE Saab 9-3 second generation. Indicates that an oil/filter change is required along with several inspections and additional maintenance such as air filter or spark plug replacement.

TIME FOR MAIN SERVICE Saab 9-3 second generation. Will be set when additional maintenance is necessary, such as air filter or spark plug replacement. When the message Time for service. is displayed, contact your Saab Dealer for a service appointment. Failure to perform scheduled maintenance in a timely manner may result in serious damage to key components or systems.

 

That it is the full procedure how to reset service light indicator Saab 9-3 second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Saab cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all SAAB vehicles.

2 thoughts on “Reset service light indicator Saab 9-3 second generation

Leave a Reply

Your email address will not be published. Required fields are marked *