Reset service light indicator Opel Vectra C

Reset service light indicator Opel Vectra C. From years: 2002, 2003, 2004, 2005, 2006, 2007, 2008.

How to reset service light indicator Opel Vectra C.

  1. Get into the car and shut all doors.
  2. Press and hold the trip reset button.
  3. Put you foot on the brake, press and hold down.
  4. Turn on the ignition to the point where all the lights come on, do not start the engine.
  5. Continue to hold the trip button and brake pedal for about 15 seconds.
  6. At this point InSP will be reset.
  7. Now you can release the trip button and brake pedal, the indicator is reset.

If the above procedure does not work try this.

Second procedure how to reset service light indicator Opel Vectra C.

  1. Get into the car and shut all doors.
  2. Press and hold the trip reset button.
  3. Turn on the ignition to the point where all the lights come on, do not start the engine.
  4. Continue to hold the trip button for about 15 seconds.
  5. After that InSP will be reset.
  6. Now you can release the trip button and brake pedal, the indicator is reset.

 

That it is the full procedure how to reset service light indicator Opel Vectra C. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Opel cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Opel vehicles.

3 Responses to Reset service light indicator Opel Vectra C

  1. devis says:

    I just tried this to reset service InSP warning light on my Opel Vectra C and it worked fine, thank you so much for this.

  2. andrew slevin says:

    Hi i hav had a problem wi my opel vectra 1.6 2005 car. Ta problem started when ta seat was pushed forward 2 hard and it loosened ta connectors ouder ta seat i reconnected it but every so often ta light would come back on i noticed ta connector was damaged so rewired ta conncetor wi a normal crimp connector and airbag light has stayed on i checked all ta oder connectors on ta drivers side to the airbags and they all got continuity so ta wiring is all ok but i unplugged ta airbag light on ta side on ta drivers seat. I hav tryed tests ta turning ta airbag light out.. E.g disconnected ta battery for 20 mins, and turnin ignition on till airbag light goes out out den knock ta off and do dat three times and start engine but none of it has worked… I hav also tryed 2 find ta yellow 2 pin connector that resets some airbag light but havent been able to find it plz help i am due my mot soon which will fail on airbag light

    • admin says:

      Hello Andrew, to see exactly what is the problem on you Opel Vectra you must connect your car on a auto tester. If you say you checked all the plugs and all wires are ok with this car tester can see exactly if something is broken or your airbag gets too much power. If it’s not broken you can erase the error, search on web specialized service opel. Please let us know how you solved the problem. Thank you.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>