Reset service light indicator Nissan Frontier

Reset service light indicator Nissan Frontier. From years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How to reset service light indicator Nissan Frontier. From years: 2005, 2006, 2007, 2008, 2009, 2010.

Speedometer Nissan Frontier.
The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h).
Odometer/Twin trip odometer Nissan Frontier.
The odometer/twin trip odometer is displayed when the ignition key is in the ON position.

The odometer records the total distance the vehicle has been driven.
The twin trip odometer records the distance of individual trips.

Changing the display Nissan Frontier with twin trip odometer:
For vehicles equipped with twin trip odometer, pushing the change button changes the display as follows: Trip A -> Trip B -> Trip A.

For vehicles equipped with trip computer, pushing the change button changes the display as follows:
Trip A -> Trip B -> Distance to Empty -> Average speed -> Average fuel consumption -> Journey time -> Trip A.
For additional information, refer to “Trip computer ” later in this section.

Resetting the trip odometer Nissan Frontier:
Pushing the change button for more than 1 second resets the trip odometer to zero.

TRIP COMPUTER Nissan Frontier (if so equipped).
The display of the trip computer is situated in the speedometer display. When the ignition is turned to ON, the display scrolls all the modes of the trip computer and then shows the mode chosen before the ignition switch was turned OFF. When the ignition switch is turned to ON, modes of the trip computer can be selected by pushing the trip computer change button. The following modes can be selected:

Distance to empty Nissan Frontier (dte—mile or km).
The distance to empty (dte) mode provides you with an estimation of the distance that can be driven before refueling. The dte is constantly being calculated, based on the amount of fuel in the fuel tank and the actual fuel consumption.
The display is updated every 30 seconds.
The dte mode includes a low range warning feature: when the fuel level is low, the dte mode is automatically selected and the digits blink in order to draw the driver’s attention. Press the change button if you wish to return to the mode that was selected before the warning occurred. The dte mark (dte) will remain blinking until the vehicle is refueled.
When the fuel level drops even lower, the dte display will change to (—-).

NOTE:

  • If the amount of fuel added while the ignition switch is OFF is small, the display just before the ignition switch is turned OFF may continue to be displayed.
  • When driving uphill or rounding curves, the fuel in the tank shifts, which may momentarily change the display.

Average speed Nissan Frontier (MPH or km/h).
The average speed mode shows the average vehicle speed since last reset. Resetting is done by pressing the change button for more than approximately 1 second. The display is updated every 30 seconds. The first 30 seconds after a reset, the display shows (—-).

Average fuel consumption Nissan Frontier (Mpg or l/100km).
The average fuel consumption mode shows the average fuel consumption since the last reset. Resetting is done by pressing the change button for more than approximately 1 second. The display is updated every 30 seconds. At about the first 1/3 miles (500 m) after a reset, the display shows (—-).

Journey time Nissan Frontier.
The journey time mode shows the time since the last reset. The displayed time can be reset by pressing the change button for more than approximately 1 second.

Trip computer reset Nissan Frontier.
Pushing the change button for more than 3 seconds will reset all modes except Trip A and distance to empty (dte).

Reset service light indicator Nissan Frontier manual 2005-2010.

The full procedure how to reset service light indicator Nissan Frontier is taken from owners manual.

 

How to reset service light indicator Nissan Frontier. From years: 2011, 2012.

SPEEDOMETER AND ODOMETER Nissan Frontier.
Speedometer
The speedometer indicates vehicle speed.
Odometer/Twin trip odometer
The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position.
The odometer records the total distance the vehicle has been driven.
The twin trip odometer records the distance of individual trips.

Changing the display Nissan Frontier:
For vehicles equipped with twin trip odometer, pressing the change button changes the display as follows: Trip A → Trip B → Trip A.

For vehicles equipped with trip computer, pressing the change button changes the display as follows: Trip A →Trip B →Distance to Empty→ Average speed → Average fuel consumption → Journey time → Trip A. For additional information, refer to “Trip computer” later in this section.

Resetting the trip odometer Nissan Frontier:
Pushing the change button for more than 1 second resets the currently displayed trip odometer to zero.

Loose fuel cap warning message.
Press the reset buttonA for more than 1 second to reset the LOOSE FUEL CAP warning message after the fuel cap has been tightened. For additional information see “Fuel-filler cap” in the “Pre-driving checks and adjustments” section.

Check tire pressure warning message.
The CHECK TIRE PRES (pressure) warning message is displayed when the low tire pressure warning light is illuminated and low tire pressure is detected. Check and adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label. The CHECK TIRE PRES warning message turns off when the low tire pressure warning light turns off.
Push the reset button A for more than 1 second to turn off the CHECK TIRE PRES warning message. The low tire pressure warning light remains illuminated until the tires are inflated to the recommended COLD tire pressure. The CHECK TIRE PRES warning message is displayed each time the ignition switch is placed in the ON position as long as the low tire pressure warning light remains illuminated. For more information see “Low tire pressure warning light” in the “Instruments and controls” section, “Tire Pressure Monitoring System (TPMS)” in the “Starting and driving” and “Wheels and tires” section in the “Maintenance and do-it-yourself” section of this Owner’s Manual.

Reset service light indicator Nissan Frontier manual 2011-2012.

All information how to reset oil service light Nissan Frontier is taken from owners manual.

 

Click here to see where is located Nissan Frontier cabin air filter.

That it is the full procedure how to reset service light indicator Nissan Frontier. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Nissan cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Nissan vehicles.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>