Reset or turn off oil service required Volvo C30

How to reset regular service interval on a Volvo C30. Made in : 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013.

To turn off the maintenance indicator you must follow next steps:

Reset service light Volvo C30

  1. Turn the ignition to position one.
  2. Push and hold the trip meter reset button.
  3. Now turn the ignition to position number two.
  4. You will know that the service light is reset when the yellow [i] light start blinking.
  5. Now you can release the button.

Volvo uses different systems for warning of low/high oil level or low/high oil pressure. Certain variants have an oil pressure sensor, and then the lamp for oil pressure is used. Other variants have an oil level sensor, and then the driver is informed via the warning symbol in the centre of the instrument unit as well as by display texts.

Certain models have both variants. Contact a Volvo dealer for more information. Change the engine oil in accordance with the intervals specified in the Service and Warranty Booklet. Using oil of a higher than specified grade is permitted. If the car is driven in adverse conditions, Volvo recommends using an oil of a higher grade than that specified on the decal, see page 290. For capacities, see page 291 and onwards. Checking the oil level in a new car is especially important before the first scheduled oil change.

Volvo recommends checking the oil level every 2 500 km. The most accurate measurements are made on a cold engine before starting. The measurement will be inaccurate if taken immediately after the engine is switched off. The dipstick will indicate that the level is too low because the oil has not had time to flow down into the oil sump.

This is the full procedure how to reset service light indicator on a Volvo C30.

Leave a Reply

Your email address will not be published. Required fields are marked *