Reset oil service light Saturn Relay

Reset oil service light Saturn Relay. From year: 2005, 2006, 2007.

How to reset oil service light Saturn Relay. 

The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE OIL SOON message being turned on, reset the system.

  1. With the ignition key in RUN/ON position, but the engine off.
  2. Immediately press the set/reset button until OIL is displayed on the Driver Information Center (DIC).
  3. Once OIL light is displayed, press and hold the set/reset button for five seconds.
  4. The number will disappear and be replaced by 100 (indicating 100% oil life remaining).
  5. Switch the ignition to OFF and then start your car to see if change oil soon light has been reset.
  6. If the CHANGE OIL SOON light comes back on when you start your Relay, the engine oil life indicator has not reset. Repeat the procedure.

All information how to reset oil service light is taken from Saturn Relay owners manual.

Reset oil service light Saturn Relay manual.

Reset oil service light Saturn Relay button(Set/Reset): Press this button to set or reset certain functions and to turn off or acknowledge messages on the DIC.

Oil Life Saturn Relay. Press the information button until OIL LIFE displays. This mode shows an estimate of the oil’s remaining useful life. If you see OIL LIFE 99% on the display, that means 99% of the current oil life remains. The engine oil life system will alert you to change your oil on a schedule consistent with your driving conditions. When the remaining oil life is low, the CHANGE OIL SOON message will appear on the display. You should change your oil as soon as possible. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule in this manual. Remember, you must reset the OIL LIFE yourself after each oil change. It will not reset itself. Also, be careful not to reset the OIL LIFE accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. The display will show 100% when the system is reset.

CHANGE OIL SOON Saturn Relay. This message displays when service is required for the vehicle. See your retailer. The CHANGE OIL SOON message is reset by acknowledging the message. The OIL LIFE screen under the gages menu on the DIC must also be reset. See above Oil Life Saturn Relay. This message displays while the ignition is in RUN. Press any of the DIC buttons to acknowledge this message and to clear it from the screen. This message continues to display for two seconds if it has not been acknowledged when the engine is turned off. It also re-displays for two seconds if the message has been acknowledged, but the condition still exists when the engine is turned off. If the condition still exists, the message re-appears when the engine is turned on.

 

That it is the full procedure how to reset oil service light Saturn Relay. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Saturn cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all SATURN vehicles.

Leave a Reply

Your email address will not be published. Required fields are marked *