Reset oil service light Saturn LS1. From year: 1999, 2000, 2001, 2002, 2003, 2004, 2005.
How to reset oil service light Saturn LS1.
The Saturn LS1 Oil Life indicator calculates when to change your engine oil and ﬁlter based on vehicle use. Anytime your oil is changed, reset the warning light so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a Change Engine Oil light being turned on, reset the warning oil light.
After changing the engine oil, reset the warning oil light by performing the following steps:
- Switch the ignition key to ON/RUN, one position befor you start the car.
- Fully depress and release the gas pedal 3 times within 5 seconds.
- If the Change Engine Oil warning light is flashing, the system is reset.
- The warning oil light will flash for up to 30 seconds or until the ignition is switch to off.
- If the warning light comes on again and stays on for 30 seconds at the next ignition cycle, it did not reset. You will need to reset the system again.
All information how to reset oil service light is taken from Saturn LS1 owners manual.
If this light comes on and stays on, it means that service is required for your Saturn LS1.
Scheduled Maintenance Saturn LS1. When the Change Engine Oil light comes on, it means that service is required for your vehicle. Have your vehicle serviced as soon as possible within the next 600 miles (1 000 km). It is possible that, if you are driving under the best conditions, the engine oil life system may not indicate that vehicle service is necessary for over a year. However, your engine oil and ﬁlter must be changed at least once a year and at this time the system must be reset. Your Saturn retailer has Saturn-trained service technicians who will perform this work using genuine Saturn parts and reset the system. If the engine oil life system is ever reset accidentally, you must service your vehicle within 3,000 miles (5 000 km) since your last service. Remember to reset the oil life system whenever the oil is changed. When the Change Engine Oil light appears, certain services, checks and inspections are required. Required services are described in the following for “Maintenance I” and “Maintenance II.” Generally, it is recommended that your ﬁrst service be Maintenance I, your second service be Maintenance II and that you alternate Maintenance I and Maintenance II thereafter. However, in some cases, Maintenance II may be required more often.
Maintenance I Saturn LS1. Use Maintenance I if the Change Engine Oil light comes on within ten months since vehicle was purchased or Maintenance II was performed.
Maintenance II Saturn LS1. Use Maintenance II if the previous service performed was Maintenance I. Always use Maintenance II whenever the light comes on ten months or more since the last service or if the light has not come on at all for one year.
That it is the full procedure how to reset oil service light Saturn LS1. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Saturn cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.
This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.