Reset oil service light Nissan Murano

Reset oil service light Nissan Murano. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How to reset oil service light Nissan Murano. From years: 2003, 2004, 2005, 2006, 2007, 2008.

  1. Turn the ignition to run, one position before starting engine.
  2. Maintenance and tire pressure information will be displayed when the MAINT button is pushed on the centre console.
  3. To display the setting of the maintenance interval, select the Engine Oil key using the joystick and push the ENTER button.
  4. To reset the maintenance interval, select the Reset key using the joystick and push the ENTER button.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

MAINTENANCE NOTICE on a Nissan Murano.

The “MAINTENANCE NOTICE” screen (“ENGINE OIL” or “TIRE ROTATION”) will be automatically displayed as shown when both of the following conditions are met:

  • the vehicle is driven the set distance and the ignition switch is turned OFF.
  • the ignition key is turned ON the next time the vehicle will be driven.

To return to the previous display after the “MAINTENANCE NOTICE” screen is displayed, push the “BACK” button.

The “MAINTENANCE NOTICE” screen displays each time the key is turned ON until one of the following conditions are met:

  • “RESET” is selected.
  • “Display Maintenance Notification” is set OFF.
  • the maintenance interval is set again

Reset oil service light Nissan Murano manual 2003-2008.

The full procedure how to reset oil service light Nissan Murano is taken owners manual.

 

How do you reset oil service light Nissan Murano. From years: 2009, 2010, 2011, 2012.

  1. Turn the ignition to run, push START/STOP button once.
  2. Switches for the trip computer are located on the right side of the combination meter panel.
  3. When the ignition switch is pushed to the ON position press the (square) button to bring up Setting and and press (circle) button to select.
  4. Use the (circle) button to scroll to MAINTENANCE and use the (square) button to select.
  5. Select ENGINE OIL to set or reset the distance for changing the oil.
  6. Repeat step 2 to set or reset the distance for the OIL FILTER.
  7. Turn the ignition off and then start the engine to verify the indicator has been reset.

Maintenance information display cannot be operated when the vehicle is moving. Stop the vehicle in a safe place to see the  information.

Maintenance information on a Nissan Murano.

The maintenance intervals can be displayed for the engine oil, oil filter, tire and other reminders.

To set a maintenance interval, select a preferred item from the list.

You can also set to display a message to remind you that the maintenance needs to be performed.

The following example shows how to set the engine oil maintenance information. Use the same steps to set the other maintenance information.

Reset oil service light Nissan Murano manual 2009-2010

            Nissan Murano 2009-2010.

Reset oil service light Nissan Murano manual 2011-2012

Nissan Murano 2011-2012.

All information how to reset oil service light Nissan Murano is taken owners manual.

 

That it is the full procedure how to reset oil service light Nissan Murano. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Nissan cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Nissan vehicles.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>