Reset oil service light Mercury Grand Marquis
Reset oil service light Mercury Grand Marquis. From years: 2006, 2007, 2008, 2009, 2010, 2011.
How to reset oil service light Mercury Grand Marquis.
To reset the oil monitoring system to 100% after each oil change on a Mercury Grand Marquis [approximately 5,000 miles (8,000 km) or 180 days] perform the following:
- Turn the ignition to run, one position before starting engine.
- Press and hold the RESET control for 2 seconds and release. Oil life is set to 100% and “OIL LIFE XXX% HOLD RESET IF NEW IL” is displayed.
- Press and hold the RESET control for 3 seconds and release. Oil life is set to 100% and “OIL LIFE START VALUE SET TO XXX%” is displayed.
An oil change is required whenever indicated by the message center and according to the recommended maintenance schedule.
OIL LIFE CHANGE SOON. Displayed when the engine oil life remaining is 10% or less. When oil life left is between 10% and 0%, the XX% OIL LIFE CHANGE SOON message will be displayed.
OIL CHANGE REQUIRED. Displayed when the oil life left reaches 0%, the OIL CHANGE REQUIRED message will be displayed.
All information how to reset oil service light Mercury Grand Marquis is taken owners manual.
That it is the full procedure how to reset oil service light Mercury Grand Marquis. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Mercury cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.
This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.