Reset oil service light Jeep Renegade. How to reset maintenance light, reset service light indicator. Can be made manually by use button on car dash board.
How do you reset oil service light Jeep Renegade.
Many Jeep vehicles track the intervals between oil changes to alert the driver when the next oil change is needed.
A light illuminates on the control panel when the internal system determines it is time for an oil change.
Most Jeep mechanics reset the oil light as part of the oil change service.
If you change the oil in your Jeep yourself, you can manually reset the oil light.
Resetting the oil light after an oil change allows the system to accurately track the time until the next oil change is needed.
The procedures described in this article apply to 2010 Jeep models.
- Turn the ignition switch to the ON position. Do not start the engine.
- Press the accelerator pedal completely to the floor slowly three times within a 10 second span.
- Turn the ignition switch to the OFF position.
- Turn the ignition switch to the ON position again. The oil light should be off. If the oil light is still illuminated, repeat the previous steps.
That it is the full procedure how to reset oil service light Jeep Renegade. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Jeep cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.
This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.