Reset oil service light Jaguar XJ

Reset oil service light Jaguar XJ. How to reset maintenance light, reset service light indicator. Can be made manually by use button on car dash board.

How do you reset oil service light Jaguar XJ whit diesel engine. From year: 2008.

  1. Press and hold reset button then turn ignition on.
  2. Release reset.
  3. Press and hold trip button.
  4. When holding trip button, press and hold reset button.
  5. Continue to hold both buttons for 10 seconds ( Message centre should display message like RESETTING SERVICE followed by SERVICE RESET ).

Numbers 1 to 4 need to be done within 3 seconds otherwise it will time out.

 

That it is the full procedure how to reset oil service light Jaguar XJ. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Jags cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Jaguar vehicles.

7 thoughts on “Reset oil service light Jaguar XJ

  1. quiero saber si el es mismo procedimiento para el jaguar 2013 v8 5000.
    gracias por su colaboracion

  2. Do you know how to reset the service reminder light on a 2013 Jaguar XJ?

    thanks

    1. Service interval indicator on a Jaguar XJ from 2013.

      The service interval message will only be displayed when the vehicle has less than 3400km (2000 miles) before the service is due.

      When the ignition switch is turned to position II and the vehicle has started its service countdown, a message SERVICE REQ’D IN XXXX km (XXXX MLS) is displayed in the message centre. At the same time the AMBER priority indicator is illuminated.

      After approximately five seconds, the display reverts to show the pre-set requirements.

      When the service distance has been reached, a message SERVICE REQUIRED is displayed and the red priority indicator will be illuminated.
      After approximately five seconds, the display reverts to show the pre-set requirements.

      The distance countdown reduces in increments of 50 km or 50 miles, depending on which display units have been selected. The distance countdown is controlled by the engine management system and is automatically adjusted to allow for driving style and conditions to gauge when the service becomes necessary.

      Caution: If no service interval indicator is displayed during the vehicle service cycle, ensure that your vehicle is serviced in accordance with the intervals as stated in the Service Portfolio.

      After completion of each service, the Jaguar Dealer/Authorised Repairer will reset the distance display to commence the countdown to the next service.

Leave a Reply

Your email address will not be published. Required fields are marked *