Reset oil service light Hummer H2

Reset oil service light Hummer H2. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How do you reset oil servic light Hummer H2. From year: 2003.

Reset GM Oil Life System as follow:

  1. Turn the ignition to run, one position before starting engine.
  2. Press the fuel information button (located on instrument panel cluster above steering column) until ENGINE OIL LIFE appears in the display.
  3. Press and hold the select button (arrow button) for 5 seconds while ENGINE OIL LIFE is displayed. OIL LIFE RESET will appear on the display for 10 seconds to let you know the system is reset.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

The GM Oil Life System shows an estimate of the oil’s remaining useful life.  It will show 100% when the system is reset after an  oil change. It will alert you to change your oil on a schedule consistent with your driving conditions. Always reset the engine oil life after an oil change.

All information is taken from the Hummer H2 owners manual.

Reset oil service light Hummer H2.

 

How to reset oil service light Hummer H2. From years: 2004, 2005, 2006, 2007.

The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE ENGINE OIL message being turned on, reset the system.

  1. Turn the ignition key to RUN with the engine off, one position before starting engine.
  2. Fully press and release the accelerator pedal slowly three times within five seconds.
  3. If the OIL LIFE RESET message flashes for 10 seconds, the system is resetting.
  4. Turn the key to LOCK.

If the CHANGE ENGINE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure. If it still does not reset, see your dealer for service.

All information is taken from the Hummer H2 owners manual.

Reset oil service light Hummer H2, 2004 - 2007.

 

Full procedure how to reset oil service light Hummer H2. From years: 2008, 2009, 2010.

The Oil Life System calculates engine oil life based on vehicle use and displays CHANGE ENGINE OIL SOON on the Driver Information Center (DIC) when it’s necessary to change your oil and filter. The Oil Life System should be reset to 100% only following an oil change. To reset the Oil Life System:

  1. Turn on the ignition, one position before starting engine.
  2. Press the (Vehicle Information) button until the DIC displays OIL LIFE REMAINING.
  3. Press and hold the (Set/Reset) button until 100% is displayed.
  4. Turn off the ignition and then start the engine to verify the indicator has been reset.

All information is taken from the Hummer H2 owners manual.

Reset oil service light Hummer H2, 2008 - 2010.

 

That it is the full procedure how to reset oil service light Hummer H2. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Hummer cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Hummer vehicles.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>