Reset oil service light Honda Fit

Reset oil service light Honda Fit. From years: 2007, 2008, 2009, 2010, 2011, 2012.

How do you reset oil service light Honda Fit.

Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as follows:

  1. Turn the ignition switch to the ON (II) position, one position before starting engine.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed. Picture below.
  3. Reset oil service light Honda Jazz.
  4. Press the select/reset knob for about 10 seconds.
  5. The engine oil life and the maintenance item code(s) will blink.
  6. Press the select/reset knob for another 5 seconds.
  7. The maintenance item code(s) will disappear, and the engine oil life will reset to ‘‘100.’’
  8. Turn the ignition off and then start the engine to verify the indicator has been reset.

If you have the required service done but do not reset the display, or reset the display without doing the service, the system will not show the proper maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.

All information is taken from the Honda Fit owners manual.

Reset oil service light Honda Fit.

 

That it is the full procedure how to reset oil service light Honda Fit. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Honda cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Honda vehicles.

 

3 thoughts on “Reset oil service light Honda Fit

  1. That piece of information was very helpful. But I was actually looking how to reset the gear oil HMMF warning light on my Honda Fit Yr10.

    1. Put the key into the ignition and switch it to the second position, but without starting the engine;
      Switch the key back, to the first position;
      Press and hold the SEL/RESET button and switch the key again to the second position;
      Wait a few seconds and the HMMF light should reset.

Leave a Reply

Your email address will not be published. Required fields are marked *