Reset low tire pressure warning light Toyota Sienna 2 generation

Reset low tire pressure warning light Toyota Sienna 2 generation. From year: 2004, 2005, 2006, 2007, 2008, 2009, 2010.

How to reset low tire pressure warning light Toyota Sienna second generation.

This light warns that the tire pressure of one or more of your tires (without the spare tire) is low. The light comes on when the engine switch is turned to the “ON” position. It goes off after a few seconds. This indicates that the tire pressure warning system is functioning properly. If the warning light comes on, stop your vehicle in a safe place as soon as possible and check that the inflation pressure of all four tires is as specified on the tire and loading information label.

The light should go off several minutes after the tire pressure is adjusted. If the warning light comes on after blinking for 1 minute, the tire pressure warning system may be malfunctioning.

How can you reset low tire pressure warning light Toyota Sienna 2 generation.

When initializing the system, the present tire inflation pressure is stored as standard. The tire pressure warning system determines decreased air pressure by comparing the present and the standard tire inflation pressures. When you change the set tire inflation pressure, it is necessary to initialize the tire pressure warning system. When changing the tire size.

To initialize the system, perform the following:

  1. Park the vehicle in a safe place and turn the engine switch off.
  2. Adjust the pressure of all the installed tires to the specified cold tire inflation pressure level.
  3. Turn the engine switch is in “ON” position.
  4. Push and hold the tire pressure warning reset switch until the tire pressure warning light blinks slowly three times.
  5. Wait for several minutes with the engine switch “ON”, and then turn the engine switch to the “ACC” or “LOCK” position.

If you push the tire pressure warning reset switch while the vehicle is moving, initialization is not performed. If you push the tire pressure warning reset switch accidentally and initialization is performed, adjust the tire inflation pressure to the specified level and initialize the system again.

Reset low tire pressure service light Toyota Sienna 2 generation

 

If the tire pressure warning light does not blink slowly three times when you push and hold the tire pressure warning reset switch, initialization has failed and the tire pressure warning system may not work properly. In this case, initialize the system again. If initialization cannot be performed, have the system checked at your Toyota dealer.

Do not push the tire pressure warning reset switch without first adjusting the tire inflation pressure to the specified level. Otherwise, the tire pressure warning light may not come on even if the tire inflation pressure is low, or it may come on when the tire inflation pressure is actually normal.

 

That it is the full procedure how to reset low tire pressure warning light Toyota Sienna second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Toyota vehicles.

2 thoughts on “Reset low tire pressure warning light Toyota Sienna 2 generation

  1. After applying the procedure for reseting the low tire pressure it didn’t stop blinking in my car and the blinking continuously and blinking fast. what do i do next?

Leave a Reply

Your email address will not be published. Required fields are marked *