Reset low tire pressure warning light Toyota Matrix 1 generation

Reset low tire pressure warning light Toyota Matrix 1 generation E130. From year: 2005, 2006, 2007, 2008.

How to reset low tire pressure warning light Toyota Matrix 1 generation.

This light warns that the tire inflation pressure of any one of the tires is critically low. The light comes on when the ignition key is turned to the “ON” position. It goes off after a few seconds. This indicates that the low tire pressure warning system is functioning properly.

If the light comes on while driving, adjust tire inflation pressure to the specified level.

kPa (kgf/cm2 or bar, psi).

Tire size: P205/55R16 89H, P215/50ZR17, P215/50R17 90H.

Front: 220 (2.2, 32)

Rear: 220 (2.2, 32)

Wheel size: 16 x 6 1/2JJ, 17 x 7 JJ.

After the tire inflation pressure is adjusted, push the tire pressure warning system reset switch for a few seconds and make sure the warning light goes off. If the light still remains or blinks once a second, have the low tire pressure warning system checked at your Toyota dealer. If the light blinks once every three seconds, the low tire pressure warning system needs to be initialized.

Reset low tire pressure warning light Toyota Matrix 1 generation.

TIRE PRESSURE WARNING SYSTEM RESET SWITCH.

The tire pressure warning system need to be initialized in the following conditions:

  • When the low tire pressure warning light blinks once every three seconds.
  • After replacing or rotating tires or wheels.

When initializing the system, the present tire condition is stored as a standard.

To initialize the system, perform the following:

  1. Park the vehicle at a safe place and apply the parking brake. Stop the engine.
  2. Adjust the pressure of all the installed tires to the specified level.
  3. Turn the ignition key to “ON”. If the low tire pressure warning light comes on, push the reset switch for a few seconds and make sure the warning light goes off.
  4. Push and hold the reset switch until the low tire pressure warning light blinks three times.

Initialization is completed after driving at the speeds of 30 km/h (19 mph) or over for more than one hour. If the following driving conditions are satisfied, initialization will be completed in about one hour.

 All information how to reset low tire pressure warning light Toyota Matrix 1 generation.

 

That it is the full procedure how to reset low tire pressure warning light Toyota Matrix first generation E130. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.  

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Click hear to see full procedure how do you reset the oil light indicator. How to reset the maintenance light and how do you reset service light for all Toyota vehicles.

Leave a Reply

Your email address will not be published. Required fields are marked *