Reset change oil light indicator Fiat 500. From year: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.
How to reset change oil indicator system Fiat 500.
Your vehicle is equipped with an engine oil change indicator system. The “Change Engine Oil” message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil changeindicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, press and release the MENU/ESC button. To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure.
- Turn the ignition switch to the ON position. Do not start the engine.
- Fully depress the accelerator pedal slowly, three times within 10 seconds.
- Turn the ignition switch to the OFF/LOCK position.
If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure.
All information how to reset change oil light indicator is taken from Fiat 500 owners manual.
That it is the full procedure how to reset oil maintenance required Fiat 500. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.
This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.