Checking service reminder light indicator Toyota Sequoia. From year: 2005, 2006, 2007.
How to check service reminder light indicator Toyota Sequoia.
CHECKING SERVICE REMINDER INDICATORS except the low fuel level warning light and low windshield washer fluid level warning light.
- Apply the parking brake.
- Open one of the side doors or back door. The open door warning light should come on.
- Close the door. The open door warning light should go off.
- Turn the ignition key to “ON”, but do not start the engine. All the service reminder indicators except the open door warning light should come on. The “ABS” and “VSC TRAC” warning lights, tire pressure warning light and engine oil replacement reminder light go off after a few seconds. The SRS warning light goes off after about 6 seconds. (The “TRAC OFF” (two−wheel drive models) or “VSC OFF” (four−wheel drive models), “RSCA OFF” indicator lights, height control indicator light, manual control mode indicator light and slip indicator light also come on and go off after a few seconds.)
If any service reminder indicator or warning buzzer does not function as described above, have it checked by your Toyota dealer as soon as possible.
All information how to check service reminder light indicators i staken from Toyota Sequoia owners manual.
That it is the full procedure how to check service reminder light indicator Toyota Sequoia first generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.
This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.