DIY, change the front radiator grille on Toyota Corolla 1994

Do it yourself, change the front, radiator grille on your Toyota Corolla, the car model made in the year 1994. To do this replacement, you will need a flat blade screwdriver and a Phillips screwdriver. The replacement process is very simple and it will probably take you less than 15 minutes.

     In the beginning, open and secure the hood of your car. After that, go above the front grille and remove the three Phillips screws that secure it at the top. The screws, seen in the images below, should come out without much effort.

     After you deal with these fasteners, you will have to go at the bottom of the grille, from behind and push the two clips that secure it furthermore. We marked the location of the one on the right in the picture below. The other one is on the left extremity. You should be able to push them very simply, by hand.

     This will release the grille from the bumper. Now, in most cases, the Toyota emblem on the grille has to be removed and installed onto the new grille. You can do that with a flat blade screwdriver, by prying out the three small securing tabs on the back (similar to the one seen below).

     After you make the replacement, insert the new grille and clip it into the front bumper, then secure it with the three screws above. This is all you have to do, if you plan to remove and replace the front, radiator grille on your Toyota Corolla, produced in the year 1994.

Leave a Reply

Your email address will not be published. Required fields are marked *