How to change the tail light on Subaru Outback 2000-2004

DIY, change the tail light assembly on your Subaru Outback, the model produced between the years 2000 and 2004. This replacement is quite simple and it will only require a flat blade screwdriver and an 8 mm socket with a ratchet and extension. The whole process will probably not take you more than half an…

How to change the headlight assembly on Volvo XC90 2003-2013

DIY, change the headlight assembly on your Volvo XC90, manufactured between the years 2003 and 2013. You will not require tools to make this replacement and the process is very simple. Only if you need to service the main light bulbs, you will need a Phillips screwdriver, because one of them has a plastic cover that is…

How to change the ignition coils on Volvo XC90

Do it yourself, change the ignition coils on your Volvo XC90. You will require T25 and T30 torx bit drivers and a 10 mm socket. The replacement is not that difficult, but it will most probably take you more than half an hour.     The ignition coils on this car are located beneath the plastic engine…

DIY, change the fog lights on Volvo XC90 2003-2013

DIY, remove and change the fog lights on your Volvo XC90, the model made between 2003 and 2013. You will need A T25 torx driver with a ratchet and extensions to make this replacement. The process is not that difficult, but it might take you more than half an hour.      We recommend you…

How to remove the rear door panel on Subaru Outback 2000-2004

Do it yourself, remove the rear door panel on your Subaru Outback, the model made in the years 2000, 2001, 2002, 2003 and 2004. This procedure will require a flat blade screwdriver and a Phillips screwdriver. Removing the rear door panel on this car isn’t a difficult process, so you will be able to do it…

How to change the master window switch on Subaru Outback 2000-2004

Do it yourself, change the master window switch on your Subaru Outback. The repair process shown below is similar for Outback models produced in the years 2000, 2001, 2002, 2003 and 2004. This is a very simple replacement that can be done in no more than 15 minutes. You will only require a flat blade screwdriver…

How to change the headlight on Subaru Outback 2001-2004

DIY, change the headlight assembly on your Subaru Outback, the model made between the years 2001 and 2004. This replacement is quite simple and can be done in less than half an hour, using only a 10 mm wrench, or a socket of the same size.      You will need access above the headlight you wish…

How to change the master window switch on Dodge Durango 2004-2009

DIY, remove and change the master window switch on your Dodge Durango, the model produced between the years 2004 and 2009. The replacement process for this part is very simple and can be done in less than 10 minutes. You will only require a flat blade screwdriver and a soft rag, if you want, to protect…

DIY, remove the rear door panel on Dodge Durango 2004-2009

Do it yourself, remove the rear door panel on your Dodge Durango, the model produced between the years 2004 and 2009. The removal process is pretty easy. You will need a flat blade screwdriver and a Phillips screwdriver to make this replacement. You should be able to remove and reinstall the door panel in less…

DIY, change the glass of the side mirror on Land Rover Discovery 3 LR3 2004-2009

Do it yourself, remove and change the glass of the side mirror on your Land Rover Discovery 3. This procedure is similar for models produced between the years 2004 and 2009. You will not require tools, just in some particular cases, when the glass is broken or stuck on the support on the mirror, a screwdriver is…