DIY, change the tail light assembly on Chrysler PT Cruiser 2001-2005

Do it yourself, change the tail light assembly on your Chrysler PT Cruiser, the model made between the years 2001 and 2005. This is a simple replacement that can be done in the back of your garage, in less that 15 minutes. You will require a flat headed screwdriver or a T27 torx bit with…

How to change the headlight bulb on Chrysler PT Cruiser

Do it yourself, change the headlight bulb on your Chrysler PT Cruiser. Servicing this bulb is an easy procedure and can be done without tools, in a couple of minutes.           In order to access the headlight bulb, you will have to get beneath your car, in front of the wheel and remove the…

How to change the parking brake handle and cable on GMC Sierra 2002

DIY, change the parking brake handle and cable on your GMC Sierra, the model manufactured in 2002. This procedure is the same on models made from 1999 to 2007. The only tool you’ll need is a 10 mm socket with a ratchet, or a wrench. This repair can be done in less than 20 minutes.  …

How to change an ignition coil on GMC Sierra 2002 V8

DIY, change the ignition coils on your GMC Sierra, the model made in 2002, with the Vortec V8 engine. The replacement is the same for most of the models equipped with the 4.8, 5.3 and 6.0L Vortecs. The only tool you’ll need is a 7 mm socket wrench, with a ratchet and extension. The repair is…

DIY, change the license plate light assembly on GMC Sierra 2002

Do it yourself, change the license plate light assembly on your GMC Sierra, the car model made in 2002. This repair is very simple and it will not require tools to do it, just a new assembly from your local hardware store. The replacement can be done in a couple of minutes.      Now,…

How to change the rear door panel on GMC Crew Cab 1999-2002

DIY, change the rear door panel on your GMC Crew Cab, the model made between 1999 and 2002. You will require a 7 mm socket wrench and a flat blade screwdriver to make this replacement. Removing and reinstalling the panel might take you more than half an hour.      First of all, open the rear…

DIY, change the blower motor on Honda Accord 1998-2002

Do it yourself, change the blower motor on your Honda Accord, the model made between the years 1998 and 2002. You will need an 8 mm socket wrench, with a ratchet and extension, for this repair. The whole process won’t take you more than half an hour.      You can access the blower motor…

How to change the tail light on Honda Accord 1998-2002

DIY, change the tail light assembly on your Honda Accord, produced between the years 1998 and 2002. The repair requires an 8 mm socket wrench with a ratchet, or a simple wrench, and a flat blade screwdriver. The replacement is simple and can be done in less than 30 minutes.      You can start…

DIY, remove the front door panel on Honda Accord 1998-2002

Do it yourself, remove the front door panel on your Honda Accord, the model made between the years 1998 and 2002. To remove the panel you will need a flat blade screwdriver and a Phillips screwdriver. The process will probably take you about 20 minutes.      First, open the front door of the car,…

How to change a broken door handle on Honda Accord 1998-2002

Do it yourself, change the broken door handle on your Honda Accord, the model made between the years 1998 and 2002. This is a very common and simple repair that is pretty much similar on all car doors. The tools you’ll need are a small flat blade screwdriver and a Phillips screwdriver. The replacement won’t…