DIY, remove the front door panel on Hyundai Santa Fe 2001-2006

Do it yourself, remove the front door panel on your Hyundai Santa Fe, produced between the years 2001 and 2006. You will require a flat blade screwdriver, a Phillips screwdriver and a prying tool or a putty knife. Although removing the door panel is a simple process, it might take you about 20 minutes or more.  …

How to change the tail light on Honda Cr-V 2002-2006

DIY, change the tail light assembly on your Honda Cr-V, made between the years 2002 and 2007. This replacement will require an 8 mm socket wrench with an extension and a flat headed screwdriver. Because it is quite simple, it should not take you more than 15 minutes to do it.      First of all,…

How to change the front grille on Toyota Corolla 2003-2008

Do it yourself, change the front grille on your Toyota Corolla, the model produced between the years 2003 and 2008. To do this replacement, you will require a flat blade screwdriver, a 10 mm socket wrench and about 10 minutes of your time. You might wanna need to make this repair if the grille is broken…

DIY, change the hood struts on your Honda Accord 1994-1997

Do it yourself, change the hood lift support struts on your Honda Accord, the model manufactured between the years 1994 and 1997. If your hood struts are going bad, you might notice it especially in the winter time, when they tend to have less lift pressure. But fortunately, replacing them is quite easy. You will require…

How to change the EGR valve on Honda Accord V6 1995-1997

DIY, replace the EGR valve on your Honda Accord V6, the model made in the years 1995, 1996 and 1997. This repair will require a 12 mm socket wrench with an extension and most probably a razor blade or other tool to clean the gasket material off the engine. The whole process of replacement might take you…

How to change the turn signal switch on Honda Accord 1990-1995

Do it yourself, change the turn signal switch on your Honda Accord, the model produced between the years 1990 and 1995. You will require a replacement part from your auto parts store, a Phillips screwdriver and a flat headed screwdriver. The replacement might take you about 20 minutes, but it’s quite easy, if you follow…

How to change the mirror switch on Ford Explorer 1995-2001

DIY, change the power window switch on your Ford Explorer, made between the years 1995 and 2001. The only tool you’ll need for this replacement is a flat headed screwdriver. You can do this repair by yourself, very easily, in a couple of minutes.      So, if you have problems with the mirror switch on the…

DIY, change the defrost switch on the dashboard of Honda Accord 1994-1998

DIY, change the defrost switch on the dashboard of Honda Accord, the model produced between the years 1994 and 1998. This is a very easy repair that anyone can make in a couple of minutes, using only a flat headed screwdriver.      So, if you have problems with this switch you should know that it can…

How to change the tail light assembly on GMC Yukon 2000-2006

Do it yourself, change the tail light assembly on your GMC Yukon, produced between the years 2000 and 2006. You will only require a Phillips screwdriver to make this replacement and about 10 minutes of your time. The repair can be very simple if you follow the steps below.      First of all, open…

How to change the side mirror on GMC Yukon 2000-2003

Do it yourself, change the side mirror on your GMC Yukon, the model produced between the years 2000 and 2003. This particular replacement will require a 10 mm socket wrench with a ratchet and an extension and about 15 minutes of your time.      You can start the repair by opening the front door of your…